00195941-03-UM SiplaceCA-EN - 第73页
User Manual SIPLACE CA 2 Operational Safety Edition 08/2011 EN 2.6 Safety Instructions for Operating the Placement Machine 73 2.6.6 Safety Instructions for Dockin g and Undocking the Component T rolley WA R N I N G T o p…
2 Operational Safety User Manual SIPLACE CA
2.6 Safety Instructions for Operating the Placement Machine Edition 08/2011 EN
72
2.6.5 Safety Instructions for the TwinHead Component Cameras during
a Placement Head Change
WARNING 2
During a placement head change from TwinHead to Collect&Place CA head, the component
cameras (stationary P&P, type 33, 55 x 45, and type 25, 16 x 16) for the TwinHead must be dis-
mantled, otherwise the Collect&Place CA head will collide with the camera housings.
2
Fig. 2.6 - 4 Safety Instructions for the Vision Modules during a Placement Head Change
25 FC camera, type 25
33 IC camera, type 33
33 and 25
25 and 33
25 or 33 33 or 25
33 or 25
25 or 33
25 or 33
G3
G3
G4
G4
G1
G2
G2
G1
G4
G3
G2
G1
25 or 33
User Manual SIPLACE CA 2 Operational Safety
Edition 08/2011 EN 2.6 Safety Instructions for Operating the Placement Machine
73
2.6.6 Safety Instructions for Docking and Undocking the Component Trolley
WARNING
To prevent accidents (risk of crushing), the component trolley may only be docked in or out by
one person.
2
Fig. 2.6 - 5 Safety Instructions for docking and undocking the component trolley
2
(1) Buttons on the input and output sides
2
The safety concept for the component trolley change requires the operator to press a button (item
1) on the input or output side of the machine in order to dock the component trolley in or out. This
ensures that the operator is always standing to the side of the placement machine. In addition, the
component trolley can only be docked in if the protective covers are closed.
The docking and undocking of the component trolley is described in section 5.12
, page 368. Fol-
low the instructions exactly as described in this section.
2 Operational Safety User Manual SIPLACE CA
2.6 Safety Instructions for Operating the Placement Machine Edition 08/2011 EN
74
2.6.7 Safety Instructions for Moving the Component Trolley
WARNING
To prevent accidents, ALWAYS follow the rules listed below when you move the component trol-
ley.
Always hold the handles with both hands when you want to move the component trolley.
Remember that a component trolley with the full complement of feeder modules can tip over
sideways or forward on gradients of 20° or more.
Make sure that the surface on which the trolley is moved has a significantly smaller gradient.
Be careful not to collide with obstacles. The trolley could tip forward if it is traveling fast
enough.