00193361-01 - 第19页
Retrofit Instructions Splice Detection Table Controller S / F 07/2002 Edition 19 3UHS DUDWLRQ V : Read All Install ation Instruc tions, and become famili ar with the S plic e Detect T ab le Control ler Kit, shown i n…
Retrofit Instructions Splice Detection Table Controller S / F
07/2002 Edition
18
7RROVDQG$X[LOLDU\(TXLSPHQW
– Metric Hex Ball End Wrench Set (also called “Allen” wrench)
– Diagonal Cutters
– #1 Cross Point Screwdriver (also called a “Phillips Head” screwdriver)
– A small flat bladed screwdriver.
3DUWV
&RQWHQWV6SOLFH'HWHFWLRQWDEOHFRQWUROOHUNLW6)
LWHPQR
Pieces Description Item no.:
- 1 table controller unit (TC) 00366004-01
- 1 CAT 5 cable 1,5m 00368328-01
- 1 power supply adapter 00368305-01
- installation material
Retrofit Instructions Splice Detection Table Controller S / F
07/2002 Edition
19
3UHSDUDWLRQV
: Read All Installation Instructions, and become familiar with the Splice Detect Table Controller
Kit, shown in Fig. 11 - 1:
power supply adapter cat 5 cable table controller
Retrofit Instructions Splice Detection Table Controller S / F
07/2002 Edition
20
,QVWDOODWLRQRIWKH6SOLFH'HWHFWLRQ7DEOH&RQWUROOHU
.LW
: This kit requires changing out of the stock controller module with the new module. There are
several different mounting methods for the OEM table controller and the subsequent Splice De-
tect Table Controller will mount in the identical fashion as the original.
: On the right side of the feeder table, cut the tie straps that hold the existing cable to the formed
metal extension arm (see Fig. 12 - 1).
Depending on the version of the table the cables are fixed in a U-profile. In this case please cut
the tie straps and loosen the cables in the same way.
existing cable wire ties