00194655-01 - 第52页
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis 05/2005 Edition 52 : Loosen the screw beside the plug you have just removed. 2 : Remove the top frame. : Loosen t he three screws on t he botto m fr…
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
51
: Loosen the two screws on both sides of the MTC2.
2
2
: Remove the plug on the front of the wall between the tray supplies (2 screws).
2
2
2
2 screws
Plug
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
52
: Loosen the screw beside the plug you have just removed.
2
: Remove the top frame.
: Loosen the three screws on the bottom frame of the MTC2 and remove the plate.
2
Screw
Previously removed plug
Three screws
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
53
: Remove the bottom left side plate on both sides of the MTC2, including the earth bonding
(hexagon socket + hexagon)
2
: Disconnect the sensors from both motors.
2
Mark the sensors to indicate whether they were plugged in at the top or bottom. 2
2
2
Side plate
Remove the sensors