Smart Feeder 24 mm E- Removing and Fitting the Roller Axle - 第8页

E-by SIPLACE Smart Feeder 24 mm E Removing the Roller Axle Part Exchange 5/12 CAUTION! Refer to safety inst ructions in user manual before working on the machine. ESD guidelines are to be followed Tool: T1,T5 Wear Part: …

100%1 / 16
E-by SIPLACE Smart Feeder
24 mm E
Removing the Roller Axle
Part Exchange
4/12
CAUTION! Refer to safety instructions in user manual before working on the machine.
ESD guidelines are to be followed
Tool:
T3,T5,T6
Wear Part: Consumables:
19. Remove the 2 screws with T3. 20. Remove the Stripping Device. 21. Remove these 4 screws with T3.
22. Lift up the cover. 23. Remove the 2 screw with T6. 24. Remove the washer with T5.
E-by SIPLACE Smart Feeder
24 mm E
Removing the Roller Axle
Part Exchange
5/12
CAUTION! Refer to safety instructions in user manual before working on the machine.
ESD guidelines are to be followed
Tool:
T1,T5
Wear Part: Consumables:
25. Remove the washer with T5. 26. Remove the connector. 27. Remove the ratchet.
28. Remove the spring with T5. 29. Loosen the bearing shaft with T1. 30. Remove the bearing shaft.
E-by SIPLACE Smart Feeder
24 mm E
Removing the Roller Axle
Part Exchange
6/12
CAUTION! Refer to safety instructions in user manual before working on the machine.
ESD guidelines are to be followed
Tool:
T6
Wear Part: Consumables:
31. Remove the cover. 32. Remove the Foil Disposal.
.
33. Remove the shaft with T6.
34. Pull out the shaft. 35. Pull out the Roller Axle.