3OM-1011-001 - 第313页
0305-001 4-108 Tg0859-PM-ER 12. Lighting T eaching Error Code and List of Error Messages Error Code Display A Display B 63000000 TEACH LIGHTING ERROR RESUL T WAS OUT OF T OLERANCE. NOZZLE OUTW ARD W AS OUT OF TOLERANCE. …
12. Lighting Teaching Error Code and List of Error
Messages
Shown below are the contents of error codes which might be issued in the
lighting teaching processing.
12. Lighting Teaching Error Code and List of Error Messages
0305-001 4-107 Tg0859-PM-ER
0305-001 4-108 Tg0859-PM-ER
12. Lighting Teaching Error Code and List of Error Messages
Error Code Display A Display B
63000000 TEACH LIGHTING ERROR RESULT WAS OUT OF TOLERANCE.
NOZZLE OUTWARD WAS OUT OF TOLERANCE.
63010003 TEACH LIGHTING ERROR SIDE #1 LIGHTING OFF.
63010004 TEACH LIGHTING ERROR SIDE #2 LIGHTING OFF.
63010005 TEACH LIGHTING ERROR SIDE #3 LIGHTING OFF.
63010006 TEACH LIGHTING ERROR SIDE #4 LIGHTING OFF.
63010007 TEACH LIGHTING ERROR
63010001 TEACH LIGHTING ERROR THE TEACHING OPERATION DID NOT END WITHIN
THE SPECIFIED NUMBER OF TIME.
63010002 TEACH LIGHTING ERROR HEAD LIGHTING OFF.
BACKLIGHT STAGE LIGHTING OFF.
63XXXXXX TEACH LIGHTING ERROR
except the
above-
described
codes
ETC.
63010000 TEACH LIGHTING ERROR
63010008 TEACH LIGHTING ERROR BRIGHTNESS EXCEEDS THE RANGE OF TUNING.
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [ZERO] button to return all the axes to their original positions.
(2) Re-start.
(3) If the device can’t be re-started, contact our service personnel.
Table 3D12
13. Control Side Error Code and List of Error Mes-
sages (Referential)
Shown below are the contents of error codes which might be issued in the
control side error code processing.
13. Control Side Error Code and List of Error Messages (Referential)
0305-001 4-109 Tg0859-PM-ER