RV-2-3DH_SPE_EN - 第8页
R V -2- 3D H PRODUCT SPEC I FI CA TIONS 5 4. A p pli cable Bo ard s Applic ab le boa rd s p ecifi cation Item Speci fi cation Ext ernal board dim ensi ons ■ St andard head L 50 m m × W 50 m m to L 410 mm × W 300 m m ■ …
RV-2-3DH PRODUCT SPECIFICATIONS
4
3. Environment Condition
Transportation and storage conditions
Item Environment condition
Transportation and
storage temperature
+10～+60℃
Transportation and
storage humidity
30% to 80% (with no condensation)
Operating environment condition
Item Environment condition
Ambient temperature
+15～+30℃
Ambient humidity 30% to 65% (with no condensation)
Altitude 1000 m or less from the sea level
Degree of pollution
2 (IEC60664-1 compliant, corresponding to general electronic circuit board
assembly lines)
Overvoltage category III (IEC60664-1 compliant)
RV-2-3DH PRODUCT SPECIFICATIONS
5
4. Applicable Boards
Applicable board specification
Item Specification
External board dimensions
■ Standard head
L 50 mm × W 50 mm to L 410 mm × W 300 mm
■ Longer-sized Specifications
L 50 mm × W 50 mm to L 630 mm × W 300 mm
■ Marking specification (RV - 2 - 3 DH only)
L 50 mm × W 50 mm to L 330 mm × W 250 mm
Board thickness 0.3 to 8.0 mm
Maximum board height
Standard Top side: 40 mm Bottom side: 70 mm
* 20 to 60 mm can be accommodated as the height on the top side by
changing the height of lighting.
(Selectable at the time of purchase)
Payload
4.0 kg or less (The transfer speed is changed variably according to the
payload.)
* Please consult us if the weight exceeds the limit.
∗ The maximum board dimensions need to be changed according to the board weight and shape.
Loading a board having a part whose height exceeds 40 mm on the top side or 70 mm on the bottom
side may damage the board or cause the device to malfunction. The above dimensions provide
clearances from the shafts and lights when boards are transferred and inspected.
If a part or solder is installed/applied within 3 mm of either end of the board in the transfer direction, the
board cannot be transferred or positioned.
Board W
Board L
Transfer rail part
RV-2-3DH PRODUCT SPECIFICATIONS
6
The maximum payload of the board is 4 kg. When you convey a board of weight more than 1 kg, you
lower the conveyance speed, and please use it. Let me carry in a board after cooling off enough so that
board surface temperature is as follows 60℃ Celsius after reflowing it. It causes belt damage, the loser
when it cannot cool off enough. (exchange indication 0.5 years)
Marking can not be used with inspection data with Longer-sized selection enabled for Longer-sized and
marking unit combination equipment. Marking can be used only in normal board mode.