SIPLACE X-Series (SIPLACE X-Series S, from SC 708.1) Edition 05/2015 EN User manual - 第110页

3 Technical data and assemblies User manual SIPLACE X-Series 3.1 Performance data From software version 708.1 Version 05/2015 110 3.1.7 SIPLACE X2 S machine performance 3 Placement head type s SIPLACE SpeedStar (C&P2…

100%1 / 430
User manual SIPLACE X-Series 3 Technical data and assemblies
From software version 708.1 Version 05/2015 3.1 Performance data
109
3.1.6 SIPLACE X3 S machine performance
3
Placement head types SIPLACE SpeedStar (C&P20)
SIPLACE SpeedStar (C&P20 P)
SIPLACE MultiStar (CPP)
SIPLACE TwinStar (TH)
SIPLACE X3 S
Placement performance
For a definition of placement performance values, see the note on page 105.
Machine Placement area 1 Placement area 2 IPC value Benchmark
value
Theoretical
value
X3 S-A C&P20 / C&P20 C&P20 65,000 76,450 102,300
C&P20 / C&P20 CPP_L 62,200 73,150 99,000
C&P20 / C&P20 CPP_H 59,100 69,500 94,000
C&P20 P / C&P20 P C&P20 P 78,100 93,750 127,875
C&P20 P / C&P20 P CPP_L 73,200 86,150 117,500
C&P20 P / C&P20 P CPP_H 70,100 82,500 112,530
CPP_L/CPP_L CPP_L 57,500 67,650 92,400
CPP_H / CPP_H CPP_H 49,750 58,500 78,250
CPP_L/CPP_L CPP_H 54,000 63,500 85,000
X3 S-B C&P20 / C&P20 TH 46,750 55,000 75,350
C&P20 P / C&P20 P TH 57,000 67,500 92,070
CPP_L/CPP_L TH 41,650 49,000 68,750
CPP_H / CPP_H TH 37,400 44,000 60,200
X3 S-C CPP_H/TH TH 25,500 29,100 41,250
X3 S-D TH / TH TH 11,900 14,000 21,450
Important notes
When setting up a machine (S; F, HS, HF, X or D-Series) next to a SIPLACE X-Series, be aware that there is limited room between the two
machines. In these cases, use a suitable conveyor extension to create room of 0.5m for the operator between the two machines.
To achieve top placement performance, fit the first machine in a SIPLACE X-Series S line with a input conveyor extension and the last
machine in the line with an output conveyor extension.
CPP_H = Multistar CPP in high assembly position
CPP_L = Multistar CPP in low assembly position
3 Technical data and assemblies User manual SIPLACE X-Series
3.1 Performance data From software version 708.1 Version 05/2015
110
3.1.7 SIPLACE X2 S machine performance
3
Placement head types SIPLACE SpeedStar (C&P20)
SIPLACE SpeedStar (C&P20 P)
SIPLACE MultiStar (CPP)
SIPLACE TwinStar (TH)
Placement performance
SIPLACE X2 S
For a definition of placement performance values, see the note on page 105.
Machine Placement area 1 Placement area 2 IPC value Benchmark
value
Theoretical
value
X2 S-A C&P20 C&P20 45,000 54,000 68,200
C&P20 CPP_L 40,200 49,500 64,900
C&P20 CPP_H 38,250 46,500 59,900
C&P20 P C&P20 P 52,000 62,500 85,250
C&P20 P CPP_L 45,500 53,750 73,300
C&P20 P CPP_H 43,000 50,750 69,220
CPP_L CPP_L 37,400 45,000 61,600
CPP_H CPP_H 33,500 39,000 55,500
CPP_L CPP_H 35,450 42,000 57,900
X2 S-B C&P20 TH 27,000 32,000 40,750
C&P20 P TH 30,800 36,250 49,450
CPP_L TH 24,000 27,500 37,450
CPP_H TH 20,600 24,500 32,900
X2 S-C TH TH 9,000 10,000 13,000
Important notes
When setting up a machine (S; F, HS, HF, X or D-Series) next to a SIPLACE X-Series, be aware that there is limited room
between the two machines. In these cases, use a suitable conveyor extension to create room of 0.5m for the operator between
the two machines.
To achieve top placement performance, fit the first machine in a SIPLACE X-Series S line with a input conveyor extension and
the last machine in the line with an output conveyor extension.
CPP_H = Multistar CPP in high assembly position
CPP_L = Multistar CPP in low assembly position
User manual SIPLACE X-Series 3 Technical data and assemblies
From software version 708.1 Version 05/2015 3.1 Performance data
111
3.1.8 Placement data
3
Component range
*a
03015 to max. 200 mm x 110 mm
Component height C&P20 4 mm
C&P20 P 4 mm
C&P20 M 4 mm
CPP
*b
6 mm
CPP
*c
8.5 mm to 11.5 mm
TH 25 mm (greater height on request)
X/Y accuracy
*d
C&P20 ± 41 μm (3σ), ± 55 μm (4σ) Component camera, type 23 (6 x 6)
C&P20 ± 41 μm (3σ), ± 55 μm (4σ) Component camera, type 41 (6 x 6)
C&P20 P ± 36μm (3σ), ± 48 μm (4σ) Component camera, type 23 (6 x 6)
C&P20 P ± 36 μm (3σ), ± 48 μm (4σ) Component camera, type 41 (6 x 6)
C&P20 M ± 25 μm (3σ)
*e
Component camera, type 41 (6 x 6)
C&P20 M ± 20 μm (3σ)
*f
Component camera, type 41 (6 x 6)
CPP ± 41 μm (3σ), ± 55 μm (4σ) Component camera, type 30 (27 x 27)
CPP ± 34 μm (3σ), ± 45 μm (4σ) Component camera, type 33 (55 x 45)
TH ± 26 μm (3σ), ± 35 μm (4σ) Component camera, type 33 (55 x 45)
TH ± 22 μm (3σ), ± 30 μm (4σ) Component camera, type 25 (16 x 16)
Angular accuracy C&P20 ± 0.5° (3σ), ± 0.7° (4σ) Component camera, type 23 (6 x 6)
C&P20 ± 0.5° (3σ), ± 0.7° (4σ) Component camera, type 41 (6 x 6)
C&P20 P ± 0.5° (3σ), ± 0.7° (4σ) Component camera, type 23 (6 x 6)
C&P20 P ± 0.5° (3σ), ± 0.7° (4σ) Component camera, type 41 (6 x 6)
C&P20 M ± 0.5° (3σ) Component camera, type 41 (6 x 6)
CPP
*g
± 0.4° (3σ), ± 0.5° (4σ) Component camera, type 30 (27 x 27)
CPP
*h
± 0.5° (3σ), ± 0.7° (4σ) Component camera, type 30 (27 x 27)
CPP ± 0.2° (3σ), ± 0.3° (4σ) Component camera, type 33 (55 x 45)
TH ± 0.05° (3σ), ± 0.07° (4σ) Component camera, type 33 (55 x 45)
TH ± 0.05° (3σ), ± 0.07° (4σ) Component camera, type 25 (16 x 16)
*)a Please note that the placeable component range is also affected by the pad geometry, the customer-specific standards, the
component packaging tolerances and the component tolerances.
*)b CPP head: in low installation position (stationary component camera not possible).
*)c CPP head: in high installation position
*)d The accuracy value, measured using the vendor-neutral IPC standard.
*)e SIPLACE X4 S micron without "High Precision" option.
*)f SIPLACE X4 S with "High Precision" option.
*)g Component dimensions between 6 mm x 6 mm and 27 mm x 27 mm.
*)h Component dimensions smaller than 6 mm x 6 mm.