SIPLACE X-Series (SIPLACE X-Series S, from SC 708.1) Edition 05/2015 EN User manual - 第145页

User manual SIPLACE X-Series 3 Technical data and assemblies From software version 708.1 Version 05/2015 3.5 Placement head 145 3.5.6.7 MultiSt ar in mixed mode with complete rot ation The MultiS tar processes small to m…

100%1 / 430
3 Technical data and assemblies User manual SIPLACE X-Series
3.5 Placement head From software version 708.1 Version 05/2015
144
3.5.6.6 MultiStar in Collect&Place mode
The MultiStar does not process components in this mode.
3
Fig. 3.5 - 10 MultiStar - Collect&Place mode
K_BE Small component (see table 3.5 - 1, page 142)
Type 30 Component camera, type 30
1 ... 12 Order of components taken up
3
Type 30
K_BE
User manual SIPLACE X-Series 3 Technical data and assemblies
From software version 708.1 Version 05/2015 3.5 Placement head
145
3.5.6.7 MultiStar in mixed mode with complete rotation
The MultiStar processes small to medium sized components in this mode.
3
Fig. 3.5 - 11 MultiStar - mixed mode
K_BE Small component (see table 3.5 - 1, page 142)
M_BE_1 Medium sized component, type 1 (see table 3.5 - 1
, page 142)
M_BE_2 Medium sized component, type 2 (see table 3.5 - 1
, page 142)
Type 30 Component camera, type 30
Type 33 Stationary component camera, type 33
1 ... 8 Order of components taken up
1 ... 12 Order of components taken up
3
Neighboring segments of the CPP head are not able to take up components of type M_BE_2 if the
diagonal length of the medium sized component, type 2 (M_BE_2) is longer than 39.8 mm.
Type 30 Type 30
Type 33 Type 33
K_BE
M_BE_2
M_BE_1
K_BE
3 Technical data and assemblies User manual SIPLACE X-Series
3.5 Placement head From software version 708.1 Version 05/2015
146
3.5.6.8 MultiStar in advanced Pick&Place mode with limited rotation
The MultiStar can place the entire component spectrum from 01005 to 50 mm x 40 mm in this
mode. The large components are picked up last, optically centered and then placed as first com-
ponents.
3
Fig. 3.5 - 12 MultiStar - mixed mode
K_BE Small component (see table 3.5 - 1, page 142)
M_BE_2 Medium sized component, type 2 (see table 3.5 - 1
, page 142)
G_BE Large component (see table 3.5 - 1
, page 142)
Type 30 Component camera, type 30
Type 33 Stationary component camera, type 33
1 ... 8 Order of components taken up
3
Neighboring segments of the CPP head are not able to take up components of types M_BE_2 and
G_BE if the diagonal length of these components is longer than 39.8 mm.
Type 30
K_BE
G_BE
Type 33
M_BE_2