SIPLACE X-Series (SIPLACE X-Series S, from SC 708.1) Edition 05/2015 EN User manual - 第360页
6 Station extensions User manual SIPLACE X-Series 6.2 PCB barcode scanner From software version 708.1 Version 05/2015 360 6.2.2 T echnical data - 2D code reader 6 6 Dimensions (L x W x H) 55 mm x 42 mm x 22 mm Weigh t 12…
User manual SIPLACE X-Series 6 Station extensions
From software version 708.1 Version 05/2015 6.2 PCB barcode scanner
359
6.2 PCB barcode scanner
Item no. 00519881-xx 2D board code reader
Item no. 00519839-xx Mechanics assembly set
Item no. 00519834-xx Electrics assembly kit for 2D board code reader
6.2.1 Description
The PCB barcode reader is used to automatically record and decode barcodes on PCBs. The
PCB barcode scanners are installed on a special frame on the input side of the placement ma-
chine on the PCB
conveyor. Depending
on the position of the barcode strips, the barcode scanner can be attached in a few simple
steps so that the strips can be read parallel to or across the PCB transport direction.
When using dual conveyors, four board barcode readers can be retrofitted. These can scan both
the top or bottom of the boards on both conveyor lanes.
There are two variants of the barcode scanner:
– 2D board code reader
This code reader processes barcodes and matrix codes. Matrix code is primarily used when
there is
not enough space for barcode labels. 6
6 Station extensions User manual SIPLACE X-Series
6.2 PCB barcode scanner From software version 708.1 Version 05/2015
360
6.2.2 Technical data - 2D code reader
6
6
Dimensions (L x W x H) 55 mm x 42 mm x 22 mm
Weight 125 grams
Code types 2D Data Matrix ECC 0, 50, 80, 100, 140 and 200
Data Matrix ECC200
QR Code, MicroQR Code
Barcode length
Dual conveyor, asynchronous
Dual conveyor, synchronous
Max. 40 characters
Max. 40 characters
Data interface RS232, USB 2.0
Electrical connection 15-pin D-Sub HD connector
Operating voltage 5 V- to 24 V-
PLEASE NOTE
When you install a PCB barcode scanner on the placement machine, you must at-
tach laser
warning label W206 contained in the retrofit kit.
User manual SIPLACE X-Series 6 Station extensions
From software version 708.1 Version 05/2015 6.3 Input conveyor and output conveyor extensions
361
6.3 Input conveyor and output conveyor extensions
Item no. 00519971.xx Input conveyor extension for single conveyor
Item no. 00519972.xx Input conveyor extension for dual conveyor
Item no. 00519973.xx Output conveyor extension for single conveyor
Item no. 00519974.xx Output conveyor extension for dual conveyor
6.3.1 Description
The input/output conveyor extensions can be fitted as board buffers between two machines. This
involves fitting an output conveyor extension to the output conveyor of the first placement machine
in the line and an input conveyor extension to the input conveyor of the following placement ma-
chine. This intermediate space serves as a buffer to prevent any waiting time during board trans-
port. The input/output conveyor extensions can also be fitted to the beginning and end of a line.
6
CAUTION
Improved ease of operation for X-Series machines and access to emergency stop button
Always fit an input conveyor extension or an output conveyor extension if the X-Se-
ries placement machine is in the same line as an X-Series machine.