SIPLACE X-Series (SIPLACE X-Series S, from SC 708.1) Edition 05/2015 EN User manual - 第364页
6 Station extensions User manual SIPLACE X-Series 6.4 Matrix tray changer From software version 708.1 Version 05/2015 364 6.4.3.2 Electrical ratings 6 6.4.3.3 Noise emissions 6 6.4.3.4 Permitted environment al factors 6 …
User manual SIPLACE X-Series 6 Station extensions
From software version 708.1 Version 05/2015 6.4 Matrix tray changer
363
6.4.3 Technical data
6.4.3.1 Dimensions, weight, other data
6
Tower 1 (XL) Tower 2
Dimensions
Length x width
Height
1305 x 600 mm²
1560 mm for 900 mm PCB conveyor height
1590 mm for 930 mm PCB conveyor height
1610 mm for 950 mm PCB conveyor height
Weight (basic package) Approx. 500 kg (with cassettes and waffle pack tray carri-
ers)
Weight (fully configured) Approx. 534 kg (with components)
Weight (moving loads) Approx. 80 kg Approx. 43.5 kg
Cassette size (L x W x H) 391.2 x 305.6 x 93.3 mm³ 352.7 x 154.8 x 133.8 mm³
Cassette weight
(fully configured)
(without waffle pack tray carrier)
Approx. 11 kg
Approx. 1.7 kg
Approx. 7.5 kg
Approx. 1.35 kg
Weight of the waffle pack tray carrier 850 g 150 g
Dimensions of waffle pack tray carri-
er (L x W x H) 386.5 x 295.8 x 11.1 mm³ 371 x 146 x 10.1 mm³
Distance from cassette to cassette 96 mm 135 mm
Distance from level to level 12 mm 11.8 mm
Vertical lift
444 mm (1st to 30th WTC
*a
)
511.2 mm (1st to 40th
WTC
a
)
Horizontal lift between transfer and
pickup position Approx. 647 mm Approx. 638 mm
Storage capacity 30 waffle pack tray carrier XL
with 60 JEDEC or
30 special magazines
of maximum size
40 waffle pack tray carriers
with 40 Jedec waffle pack
trays
Changeover time (over 5 levels) Approx. 2 s Approx. 1.5 s
Max. height of component and waffle
pack tray incl. tolerances
All levels occupied
One level free
Two levels free
8.5 mm
19.5 mm
31.5 mm
8.5 mm
19.5 mm
-
*)a Waffle pack tray carrier
6 Station extensions User manual SIPLACE X-Series
6.4 Matrix tray changer From software version 708.1 Version 05/2015
364
6.4.3.2 Electrical ratings
6
6.4.3.3 Noise emissions
6
6.4.3.4 Permitted environmental factors
6
Supply voltage 3 x 200 V~ ± 5%; 50/60 Hz (Japan)
3 x 208 V~ ± 5%; 50/60 Hz (U.S.A.)
3 x 400 V~ ± 5%; 50/60 Hz (Europe)
Overall power 1.5 kW
Rated current 2.7 A at 3 x 400 V~
4.2 A at 3 x 208 V~
Fuse 3 x 16 A
Rated current consumption of largest
consumer
2 A
Max. noise emissions 74 dB (A)
Room temperature Between 15°C and 35°C
Atmospheric humidity 30 - 75 %
(on average not higher than 45%, so that there is no
risk of condensation on the machine.)
User manual SIPLACE X-Series 6 Station extensions
From software version 708.1 Version 05/2015 6.4 Matrix tray changer
365
6.4.4 Installation notes for the MTC
In SIPLACE X2 S / X3 S / X4 S machines, an MTC can be docked onto location 2 in place of the
component trolley. To achieve this, the COT insert for the component trolley is replaced with the
docking unit for the MTC. If you want to use this MTC somewhere else, the free location can then
be configured again with a component trolley.
6
PLEASE NOTE
Configuration options for MTC
– The MTC can not be configured with a CPP head.
– The MTC can only be configured at location 2 in SIPLACE X2 S / X3 S / X4 S ma-
chines.
– SIPLACE X2 S / X3 S / X4 S machines must have a service flap installed. See “Po-
sition of protective switches on the machine” on page 86.
– The MTC can be configured with the Twin Head and the stationary cameras of type
33, 25 or the 3D coplanarity sensor.
– Only 12 nozzle magazines can be used for configurations with an MTC.