SIPLACE X-Series (SIPLACE X-Series S, from SC 708.1) Edition 05/2015 EN User manual - 第40页
1 Introduction User manual SIPLACE X-Series 1.6 Important notes on the user manual From software version 708.1 Version 05/2015 40 1.6.4 Revision t able 1 1.6.5 Further information about and content s of the documentation…
User manual SIPLACE X-Series 1 Introduction
From software version 708.1 Version 05/2015 1.6 Important notes on the user manual
39
1.6 Important notes on the user manual
1.6.1 Contents and filing of the user manual
This user manual contains basic information that must be observed when setting up, operating
and maintaining the machine. The service engineers, qualified staff, operators and users plus sys-
tem owner must therefore read it before commencing installation and commissioning. The instruc-
tions must be kept permanently accessible where the machine is used.
In addition, the user must ensure that the employees have fully understood the contents of the
user manual.
1.6.2 Danger notes
1
1.6.3 Manufacturer's/supplier's liability
We hereby confirm that the contents of this user manual are of a descriptive and explanatory na-
ture only and do not contain any contractual conditions or guaranties. The liability and obligations
assumed by ASM Assembly Systems GmbH&Co.KG can be found exclusively in the relevant
contract agreement concerning the supply of the machine described in this manual. This applies
in particular to all statements regarding performance or service life and the agreed liability for
faults or defects. The provisions of the contract regarding the liability for faults or defect are neither
extended nor restricted by any statements in this user manual.
WARNING
Read the user manual!
Tasks may only be performed by qualified staff who have completed the relevant
training.
Only perform tasks on the machine if you have precise knowledge of the relevant
section in the user manual.
Observe all warnings, caution notes and hazard notes.
Please also read chapter 2 of this user manual through carefully.
1 Introduction User manual SIPLACE X-Series
1.6 Important notes on the user manual From software version 708.1 Version 05/2015
40
1.6.4 Revision table
1
1.6.5 Further information about and contents of the documentation package
1.6.5.1 How to get information
If you have any further questions concerning this manual or if you would like additional information
on a particular topic, please get in touch with your local SIPLACE dealer or contact us directly at:
ASM Assembly Systems GmbH&Co.KG
Rupert-Mayer-Str. 44
81379 Munich 1
Edition Amendments
03/2013 First edition
10/2013 Station software SC 707.0
SIPLACE X4 S micron / X4i S micron
SIPLACE X2 S
SIPLACE SpeedStar - variant M (C&P 20 M)
Component camera, type 41
04/2014 Station software SC 707.1
SIPLACE SpeedStar - variant P (C&P 20 P) with nozzle changer
Waffle pack changer (WPC5/WPC6)
SIPLACE JTF-S/JTF-M
03015 placement
SIPLACE X4 S micron / X4i S micron with SIPLACE MultiStar (CPP)
New options
10/2014 New sales numbers for machine types
SIPLACE SmartFeeder 8 mm X
Universal nozzle changer for SIPLACE CPx
05/2015 New power supply
Status display and its meaning for signaling lamps and horn.
Overview of maintenance work - chapter 7
User manual SIPLACE X-Series 1 Introduction
From software version 708.1 Version 05/2015 1.6 Important notes on the user manual
41
1.6.5.2 SIPLACE on the World Wide Web (WWW)
We also have our own site on the Internet. Why not log onto our SIPLACE home page at
http://www.siplace.com
All the menus and other information are available in two languages: You can choose between the
German and English versions.
The various headings contain information on
– Our products
– Services
– Contacts, etc.
Registered customers can also access the SIPLACE User Group. There you can call up special
information on our placement machines, such as
– Technical documentation
– Technical information
– Spare parts catalogs etc.
Registering for access to the User Group is easy:
Click on ’Register now’.
Complete the registration form and just send it off.
You will then quickly receive access authorization with USER ID and a password.