SIPLACE X-Series (SIPLACE X-Series S, from SC 708.1) Edition 05/2015 EN User manual - 第407页
User manual SIPLACE X-Series 7 Maintenance From software version 708.1 Version 05/2015 7.1 Basic machine 407 7 Maintenance 7.1 Basic machine 7.1.1 Maintenance intervals for minor maintenance 7 7 7 7 Maintenance tasks for…
6 Station extensions User manual SIPLACE X-Series
6.17 Vision Teach Station From software version 708.1 Version 05/2015
406
User manual SIPLACE X-Series 7 Maintenance
From software version 708.1 Version 05/2015 7.1 Basic machine
407
7 Maintenance
7.1 Basic machine
7.1.1 Maintenance intervals for minor maintenance
7
7
7
7
Maintenance tasks for basic machine Duration
[min]
Each
week
Every 3
months
Every 6
months
Every 12
months
Check the fans on the covers 1 X
Maintenance tasks for gantry Duration
[min]
Each
week
Every 3
months
Every 6
months
Every 12
months
Check/clean magnetic surfaces on the X and Y
axes
2X
Maintenance tasks for conveyor Duration
[min]
Each
week
Every 3
months
Every 6
months
Every 12
months
Vacuum conveyor, nozzle changer and COT in
-
sert
1X
Maintenance tasks for Smart Pin Support Duration
[min]
Each
week
Every 3
months
Every 6
months
Every 12
months
Vacuum the machine 1 X
7 Maintenance User manual SIPLACE X-Series
7.1 Basic machine From software version 708.1 Version 05/2015
408
7.1.2 Maintenance intervals for major maintenance
7
7
CAUTION
For trained personnel only
These maintenance tasks may only be performed by specially trained personnel!
CAUTION
Filter elements
The specified maintenance intervals for checking and replacing the filter elements only
apply to the specified compressed air quality. The maintenance intervals would other
-
wise be shortened accordingly.
Maintenance tasks for basic machine Duration
[min]
Each
week
Every 3
months
Every 6
months
Every 12
months
Check the safety features on machines with 3 (4) gan
-
try(ies)
8 (10) X
Check and, where necessary, clean/replace the com
-
pressed air filter
2X
Clean/ replace the cooling air filter 2 X
Clean/replace the head exhaust air filter 1 X
Clean the protective covers 2 X
Check/clean/replace the gas pressure springs on the
protective covers
4X
Check the guide rollers on the protective covers 4 X
Maintenance tasks on the component in-feed Duration
[min]
Each
week
Every 3
months
Every 6
months
Every 12
months
Function test of empty tape cutter 2 X
Grease the cutter 2 X
Clean the cutter 2 X
Grease the blades on the cutter 2 X
Grease the COT insert 1 X
Grease the locator bearing on the component trolley for
the X feeder
1X
Grease the centering bar on the component trolley/man
-
ual table for the X feeder
1X