SIPLACE X-Series (SIPLACE X-Series S, from SC 708.1) Edition 05/2015 EN User manual - 第44页
1 Introduction User manual SIPLACE X-Series 1.6 Important notes on the user manual From software version 708.1 Version 05/2015 44 VS Vision system WPC W affle pa ck changer
User manual SIPLACE X-Series 1 Introduction
From software version 708.1 Version 05/2015 1.6 Important notes on the user manual
43
1.6.6 Abbreviations
1
A-Placement Alternating Placement
PA Placement area
CO Component
C&P20 Collect&Place head with 20 segments, SIPLACE SpeedStar
C&P20 M High-precision Collect&Place head with 20 segments, SIPLACE SpeedStar
C&P20 P High-performance Collect&Place head with 20 segments, SIPLACE SpeedStar
CPP Collect&Place head, SIPLACE MultiStar
DCA Direct chip attach
DC Dual conveyor
EDIF Energy and data interface
ESD Electrostatically-sensitive group of components
EMC Electromagnetic compatibility
ESD Electrostatic sensitive device
SC Single conveyor
FC Flip chip
WT Waffle pack tray
WTC Waffle pack tray carrier
GCU Gantry control unit
GND Ground
HCU Head control unit
I-Placement Independent placement
JTF JEDEC Tray Feeder
LBO Long Board Option
PCB Printed circuit board
MCS Machine capability study
MTC Matrix tray changer
P&P Pick&Place
P&P1 Pick&Place module 1
P&P2 Pick&Place module 2
NC Nozzle changer
SMD Surface mounted device
SC Station computer
TH Twin Pick&Place head, SIPLACE TwinStar
1 Introduction User manual SIPLACE X-Series
1.6 Important notes on the user manual From software version 708.1 Version 05/2015
44
VS Vision system
WPC Waffle pack changer
User manual SIPLACE X-Series 2 Operational safety
From software version 708.1 Version 05/2015 2.1 Safety instructions
45
2 Operational safety
2.1 Safety instructions
2.1.1 Conventions for the use of hazard symbols
This user manual contains notes that must be observed to guarantee your personal safety and to
avoid damage to equipment. These notes are highlighted by warning triangles and are indicated
as follows according to the level of risk:
2
2
2
2
2
DANGER
Definition
Danger, as used in this user manual, means that death, severe injury or considerable
damage to equipment will occur if the danger instructions are not followed.
WARNING
Definition
Warning, as used in this user manual, means that death, severe injury or considerable
damage to equipment may occur if the warning instructions are not followed.
CAUTION
Definition
Caution, as used in this user manual, means that slight injury or damage to equipment
may occur if the caution instructions are not followed.
PLEASE NOTE
Definition
A note, as used in this user manual, provides information on the product or indicates a
part of the user manual that requires particular attention.