SIPLACE X-Series (SIPLACE X-Series S, from SC 708.1) Edition 05/2015 EN User manual - 第68页
2 Operational safety User manual SIPLACE X-Series 2.2 Warning labels From software version 708.1 Version 05/2015 68 2.2.9 W arning labe l on PCB conveyor 2 Fig. 2.2 - 12 Warning label "Sensitive convey or sides"…
User manual SIPLACE X-Series 2 Operational safety
From software version 708.1 Version 05/2015 2.2 Warning labels
67
2.2.8 "Head crash" label on the IC camera of the TwinStar
"Head crash" label in fig. 2.2 - 11, item no. 03015392-02
(quantity per machine: maximum 2)
2
Fig. 2.2 - 11 "Head crash" label on the IC camera of the TwinStar
(1) Camera housing
(2) Glass plate
(3) "Head crash" label on the IC camera of the TwinStar
WARNING RISK OF HEAD CRASH 2
When changing the placement head from a TwinStar/VHF to a
SpeedStar, the SpeedStar collides with the camera housing.
Dismantle the stationary component cameras of type 33, 55 x 45,
and type 25, 16 x 16 for the TwinStar.
(3)
2 Operational safety User manual SIPLACE X-Series
2.2 Warning labels From software version 708.1 Version 05/2015
68
2.2.9 Warning label on PCB conveyor
2
Fig. 2.2 - 12 Warning label "Sensitive conveyor sides" on clamping plate of PCB conveyor
2.2.9.1 Warning label "Sensitive conveyor sides"
2
Item no. 03110412-01 (1x on each conveyor side and placement area)
Sensitive conveyor sides!
The conveyor sides are highly sensitive and may not be moved
unless the brakes have been released.
Moving the sides without releasing the brakes can cause irrepa-
rable damage to the conveyor sides.
User manual SIPLACE X-Series 2 Operational safety
From software version 708.1 Version 05/2015 2.3 Classification of camera systems
69
2.3 Classification of camera systems
2.3.1 Classification of the whole machine
2
2
2.3.1.1 Laser classification
The following modules are assigned to laser class 2:
– PCB barcode scanner
– Component sensor on SpeedStar
– Component sensor on MultiStar
2
2
2.3.2 Classification of the camera systems
2
PLEASE NOTE
Modules in laser classes 1 and 1M are not identified.
2
The operational machine as a whole is classified as laser class 1.
The laser classes are determined according to DIN EN 60825-1-2008-05 .
PLEASE NOTE
The entire machine is classified as laser class 2 if the coplanarity laser module option is
installed.
2
Laser radiation
Do not look into beam!
Laser class 2 in accordance with DIN EN 60825-1-2008-05
PLEASE NOTE
The camera illumination system used has bright LEDs fitted. These are classified as risk
group 1, according to IEC 62741:2006.
Do not look into beam!