SIPLACE X-Series (SIPLACE X-Series S, from SC 708.1) Edition 05/2015 EN User manual - 第70页
2 Operational safety User manual SIPLACE X-Series 2.4 Safety instructions for transporting the machine From software version 708.1 Version 05/2015 70 2.4 Safety instructions for transporting the machine 2 Use a fork-lift…
User manual SIPLACE X-Series 2 Operational safety
From software version 708.1 Version 05/2015 2.3 Classification of camera systems
69
2.3 Classification of camera systems
2.3.1 Classification of the whole machine
2
2
2.3.1.1 Laser classification
The following modules are assigned to laser class 2:
– PCB barcode scanner
– Component sensor on SpeedStar
– Component sensor on MultiStar
2
2
2.3.2 Classification of the camera systems
2
PLEASE NOTE
Modules in laser classes 1 and 1M are not identified.
2
The operational machine as a whole is classified as laser class 1.
The laser classes are determined according to DIN EN 60825-1-2008-05 .
PLEASE NOTE
The entire machine is classified as laser class 2 if the coplanarity laser module option is
installed.
2
Laser radiation
Do not look into beam!
Laser class 2 in accordance with DIN EN 60825-1-2008-05
PLEASE NOTE
The camera illumination system used has bright LEDs fitted. These are classified as risk
group 1, according to IEC 62741:2006.
Do not look into beam!
2 Operational safety User manual SIPLACE X-Series
2.4 Safety instructions for transporting the machine From software version 708.1 Version 05/2015
70
2.4 Safety instructions for transporting the machine
2
Use a fork-lift truck with the following specification to carry the machine:
Fork length: Min. 1800 mm
Carrying power: Min. 6,000 kg
Clear width between forks: Min. 350 mm 2
2
2.5 Safety instructions for operating the machine
2.5.1 Safety instructions for closing the protective covers
To avoid risk of injury when closing the protective covers on the machine, the operator must in-
struct the personnel concerned to always follow the instructions below when handling the protec-
tive covers.
2
WARNING
Risk of tilting!
Risk of tilting, if the required specifications for the fork-lift truck are not observed.
Only use the specified fork-lift for transportation.
Transportation of the machine is described in chapter 4
, section 4.1, page 217.
CAUTION
Risk of crushing hands!
Risk of crushing hands if the protective covers are not closed correctly.
Close the protective covers correctly.
User manual SIPLACE X-Series 2 Operational safety
From software version 708.1 Version 05/2015 2.5 Safety instructions for operating the machine
71
2
Fig. 2.5 - 1 Safety instructions for closing the protective covers (example of SIPLACE X2 S / X3 S / X4 S shown)
(1) Grab handles
To open or close the protective covers, always take hold of these by the grab handles.
When closing, do not reach into the gap between the protective cover and the machine panel.
When closing the protective cover, make sure that the area in which it is swiveled is free of
obstruction and that no other people are at risk of injury.
(1)