00196433-02_AI_Vakuumpumpe_X-Serie_70XDE+EN.pdf - 第113页
Assembly instructions: Vacuum pump for SIPLACE X-series 04/2009 Edition 113 Fig. 2.9 - 2 C&P20 with porous silencer (for compressed air) 2 2 Be careful not to soil or damage the camera lens. 2 2 2 2 2 2 2 2 2 2
Assembly instructions: Vacuum pump for SIPLACE X-series
04/2009 Edition
112
Fig. 2.9 - 1 C&P20 with hoses for compressed air (initial state)
2
2
BEFORE starting any work, shut down the operating system correctly, then switch the machine
OFF at the main power switch and disconnect from the main power supply. In addition, the com-
pressed air supply must be switched off at the compressed a
ir unit's main valve in the machine
base and vented by actuating the needle valve on the compressed air unit.
2
Assembly instructions: Vacuum pump for SIPLACE X-series
04/2009 Edition
113
Fig. 2.9 - 2 C&P20 with porous silencer (for compressed air)
2
2
Be careful not to soil or damage the camera lens.
2
2
2
2
2
2
2
2
2
2
Assembly instructions: Vacuum pump for SIPLACE X-series
04/2009 Edition
114
: Loosen the fixing screw on the silencer.
: Carefully lever out the silencer.
2
Be careful not to damage the DP drives. 2
2
Fig. 2.9 - 3 C&P20 with holding circuit vacuum unit (03005122-)
2
2
2
2
2
2
2