00196433-02_AI_Vakuumpumpe_X-Serie_70XDE+EN.pdf - 第92页

Assembly instructions: Vacuum pump for SIPLACE X-se ries 04/2009 Edition 92 : Insert the (black) vacuum hoses into the p lug-in connecto rs that are now free (see Fig. 2.8 - 17 and Fig. 2. 8 - 19 ). 03015210- Plug QSC-12…

100%1 / 128
Assembly instructions: Vacuum pump for SIPLACE X-series
04/2009 Edition
91
: Press the blue rings and remove the reducers between the pneumatic unit (at the top connec-
tion) and gantry hose (retain the reducer for subsequent conversions, e.g. to TwinHead).
: Press blanking plugs (03015210-, plug QSC-12H) into the open angled plug-in threaded joints
(see Fig. 2.8 - 19) on
the pneumatic unit.
Blanking plugs
Fig. 2.8 - 18 Vacuum hoses from the vacuum distributor block to the gantry hoses
(example for a 2-gantry placement machine)
2
: Remove the “Plug-in threaded joint QS-12” coupling, including the blue and black hose sec-
tions. Fix them in place in the pneumatic unit using cable ties.
2
2
2
Assembly instructions: Vacuum pump for SIPLACE X-series
04/2009 Edition
92
: Insert the (black) vacuum hoses into the plug-in connectors that are now free (see Fig. 2.8 - 17
and Fig. 2.8 - 19).
03015210-
Plug QSC-12H
03051739-
Plug QSC 16H
Fig. 2.8 - 19 Converted pneumatic distributor
Vacuum hoses from the vacuum distributor block to the gantry hoses (example for a 2-gantry placement machine)
2
Example for a 2-gantry placement machine:
Here there are now 2 gantries connected to the vacuum (black hoses). 2
: Connect the vacuum hose to the vacuum d
istributor block (see Fig. 2.8 - 19).
Assembly instructions: Vacuum pump for SIPLACE X-series
04/2009 Edition
93
: Close off any remaining free openings in the vacuum distributor block (with blanking plug
Q03051739-, plug QSC 16H).
: Close the connections in the pneumatic unit that are now open using blanking plugs QSC-12H.
2
: The stop valve must not be closed, otherwise the compressed air supply needed for the place-
ment or reject circuit will be interrupted.
2
: Attach the compressed air hose to the distributor.
Connections for supplying the gantry
Connecting hose, vacuum pump X
(item no.: 03075872-xx)
Vacuum pump 2 2
Connections for supplying the gantry
Connecting hose, vacuum pump X
(item no.: 03075872-xx)
Vacuum pump 1 2
Connections for vacuum pumps
One vacuum pump can supply one or
two C&P20 placement heads. 2
2
2
2
2
2