SM_SXDX12_intern_03-2017_en - 第16页
Service Work Prepare Gantry lift 16 Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2 2.2 Prepare Gantry lift 2.3 M achine preparation Bumper mounted left Release the reta ining screw for th e buffer and move it up and o…
Service Work
Overview
Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2 15
2 Service Work
2.1 Overview
Preparing the gantry lift
Remove the gantry carrier from the transportation case with the gantry lift and lock into place.
See also the "Assembly Instructions Gantry Modularity" [00196626-xx]. SX1/SX2
Preparing the Machine
Remove the changeover table
Switch off the machine.
Remove the keyboard and open the two side covers.
Push the gantry into a suitable working position in the machine.
NOTICE
Chapter
3.3.1 The Gantry lift
Locking and Transporting the Gantry Carrier
Transportation Locks and Tilt Guard
Service Work
Prepare Gantry lift
16 Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2
2.2 Prepare Gantry lift
2.3 Machine preparation
Bumper mounted left
Release the retaining screw for the buffer and
move it up and out.
Bumper dismantled "right"
Service Work
Safety Instructions for Working with Strong Magnetic Fields
Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2 17
2.4 Safety Instructions for Working with Strong Magnetic Fields
Preparation
The following steps must always be observed when disassembling or removing a magnet, guide rails
and gantries.
► Note that empty packaging must be available for disassembling the magnets. At each package only
one magnet is allowed.
► Disconnect the machine from the power supply.
► Complete all necessary repair/replacement work before removing the magnet.
► Clear the area in which the magnet is to be unpacked of all ferromagnetic objects (steel particles,
screws, tools, and metal tables, etc.) and move all recording and measuring equipment to a safe
place.
DANGER
It is only permitted SIPLACE technicians to develop the magnets, guides and portals related to
linear actuators.
It is only permitted to hand over assemblies that have been locked for customers after the legal
situation has been clarified in respect of regional legislation by the regional subsidiary in con-
sultation with the customers.
In this event, liability for any damages transfers to the regional subsidiary and the customers.