SM_SXDX12_intern_03-2017_en - 第20页
Service Work Exchange / Demounting of Y-Magnets 20 Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2 2.5 Exchange / Demounting of Y-Magnets NOTICE! Required spare parts SX1/SX2 ISO4762-M4x70-A2-70 [03082432-xx] 2 x 03098…
Service Work
Safety Instructions for Working with Strong Magnetic Fields
Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2 19
► Remove the packaging containing the magnetic track from the working area.
► Repeat these steps for each magnetic track.
► Continue any repair/replacement work.
Installing the Magnetic Track
Go for the installation of the magnetic track as follows:
► Place the magnet packaging supplied by SIPLACE containing the magnet within easy reach of the
machine.
► Open the lid and remove the magnetic track.
► Install the magnetic track in the machine.
► Remove the empty packaging.
► Repeat these steps for each magnetic track.
► Continue any repair/replacement work.
Warning Label W202 Warning Label Magnets
DANGER
Observe the safety instructions
During installation, observe all safety information above.
Service Work
Exchange / Demounting of Y-Magnets
20 Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2
2.5 Exchange / Demounting of Y-Magnets
NOTICE! Required spare parts
SX1/SX2
ISO4762-M4x70-A2-70 [03082432-xx]
2 x 03098467-xx secondary parts (magnets) SX in PV (about 14 pc in returnable packaging)
includes
16 x 03082592-xx-box lid for 03064172-01
16 x 03064172-Sx secondary part
16 x 03097977-xx safety cover Y magnets SIPL.SX1
1 x 00375988-xx label: Warning of a magnetic field
1 x 00386029-xx label: Warning hand injuries
1 x 00386030-xx label warning for strong magnets
1 x 00195600-xx TI Safety note maglev, D + E
2 x 03097870-xx plastic wedge, 65 x 180mm
1 x 03097897-xx copper hammer, 750 g additional SX2
4 x 03064172Sxx secondary part (single packed)
4 x 03082592-xx-box lid for 0306417201
4 x 03097977-xx safety cover Y magnets SIPL.SX1
14 x 03080697-xx ISO 4762 - M 5 x 18-8.8-E2J
Switch off the machine, disconnect it from the power supply and secure it to prevent unauthorized reac-
tivation.
Machine against restart. Observe the instructions in section LINK.
Y-axis magnetic disk on the storage side of the car Remove.
NOTICE
If only the magnets must be replaced, the demounting of the gantry is not mandatory. Move the
gantry to dismantle the magnets as much as possible on the side.
WARNING
Magnetic force 400kg
The secondary part of the linear drives contain permanent magnets with high magnetic fields.
There is a risk of death, serious personal injury and / or material damage. People with active
implants (eg pacemakers, insulin pumps), metal implants and magnetic or electrically conduct-
ing foreign bodies are strongly discouraged from dealing directly with the permanent magnets.
Due to the high attraction forces of crushing. Do not insert objects of magnetizable materials
(eg steel or iron tools, watches). In the vicinity of the permanent magnets
NOTICE
Please contact regarding the exchange of the magnets on the SIPLACE Service. Due to the
high magnetic forces and the associated risk of injury should the magnets be replaced only by
the SIPLACE service.
NOTICE
The copper hammer and wedges are used in case of accident to separate the magnets! Get an
additional person to help you on the work with the magnets.
Service Work
Exchange / Demounting of Y-Magnets
Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2 21
▪ The metal plate with the security inscription support is always at the top so that you can read them
on the handset. See picture.
▪ Loosen the magnet while holding firmly the magnet along with support. After removing the last screw,
remove the magnet carefully from the outside and tilt.
Caution! Please consider the notes from
00195600 - TI Safety note monorail, D + E
Magnets must be dismantle only from the outside
to the inside.
Get an additional person to help you on the work
with the magnets.
NOTICE
Exchange guide carriages / loose bearing y-axis
It must be dismantled three magnets on both sides.
Before dismantling the magnets, insert the Teflon plate and the safety support in all magnets ,
as shown in the picture . (When sharing the carriage / loose bearing y-axis on the outer 3) so
you avoid scratching the magnets.