SM_SXDX12_intern_03-2017_en - 第23页
Service Work Exchange / Demounting of Y-Magnets Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2 23 ▪ Keep holding th e magnets so lo ng until this is fixed with th e first screw. ▪ Turn the remaining ones bolts . Press…
Service Work
Exchange / Demounting of Y-Magnets
22 Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2
Mount Magnet
▪ Before assembly the magnets on the last magnets, insert the Teflon plate and the safety pad. Place
the spacer for Y magnets [03065304-xx] between the magnet and machine base.
▪ Place the magnet with safety pad on the machine frame and push it gently into the mounting position.
WARNING
Magnetic force 400kg
Place the magnets never unsecured on a work surface. When storing the magnets use always
the prescribed packaging as
„Cardboard lid for 03064172-01“ [03082592-xx] and with the safety cover.
NOTICE
Please keep an eye on the magnet Pollrichtung "N". This must be the same for all the magnets
on one side.
DANGER
The magnets attract each other and there is a risk to squeeze the fingers between the magnets.
Service Work
Exchange / Demounting of Y-Magnets
Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2 23
▪ Keep holding the magnets so long until this is fixed with the first screw.
▪ Turn the remaining ones bolts. Press the magnet against the spacer and tighten the bolts with a
torque wrench with 9 Nm.
▪ Install the remaining magnets successively by preserving this way of working.
Finally, remove the safety covers by lifting them slightly, pull on the Teflon plate and lift them whole.
Thereby you avoid scratching the magnets.
Service Work
Y-guide carriage / Y-loose bearing Replace
24 Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2
2.6 Y-guide carriage / Y-loose bearing Replace
Required spare parts
2 x 03059084Sxx Guide Carriage Y MRC 25-G2-V1
Includes:
1 x 03059084-xx Guide Carriage Y MRC 25-G2-V1
1 x 00316894-xx DIN 125-A 3.2-140HV-A2
1 x 03069101-xx ISO 4762 - M 4 x 16-8.8, zinc, DSP
1 x 03074058-xx Adapter with groove
4 x 03046828-xx DIN912-M6 x 12-8.8, zinc. DSP
1 x 03076849Sxx Running Block LR205-2RSR
Includes:
2 x 03076849-xx Running Block LR205-2RSR
2 x 03042601-xx Roller axle D25
2 x 03042601-xx ISO 4762 - M 10 x 35-A2-70
2 x 03076895-xx Slice Distance- 34x20.5x3.0
Consumables required:
02101037-xx LOCTITE 241 SCHRAUBENSICH. Medium strenght
00318197-xx Thread red lock
Tools required
1 x 60519813-xx Gantry lift, SX1/2 CoD
1 x 60519814-xx gantry carrier, SX1/2 CoD
4x 03082592-xx Cardboard lid for 03064172-01
2x 03097870-xx Plastic wedge, 65 x 180mm → wedge, plastic, 65 x 180mm
1 x 03097897-xx copper hammer, 750 g
4 x 03097977-xx safety cover Y magnets SIPL.SX1 - → safety cover Y-magnet SIPL.SX1_2
1 x 00375988-xx label: Warning of a magnetic field
1 x 00386029-xx label: Warning hand injuries
1 x 00386030-xx label warning for strong magnets
1 x 00195600-xx TI Safety note maglev, D + E
2 x 03067676-xx Transport Lock X-Rail, cpl
1 x 00376625-xx Torque wrench with reversible ratchet
1 x 03065304-xx spacer for Y magnets
1 x 03071361-xx read head MS20.xxM / test device PG-U
1 x 03090774-xx feeler gauge 0,75mm plastic
Standard tool kit from service suitcase
1 x 00376492-xx set-hexagon socket cranked screw key
1 x 00096290-xx open end wrench set
1 x 00376516-xx Wrench set 1/4 inch
1 x 00094020-xx feeler gauges
1 x 00376515-xx flashlight