SM_SXDX12_intern_03-2017_en - 第29页
Service Work Replacing the storage Cart Y-guide carriage / Y-loose bearing Replace Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2 29 Now press the gantry on the bu ffer an d tighten the screws on b oth carriage evenly…
Service Work
Y-guide carriage / Y-loose bearing Replace Replacing the storage Cart
28 Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2
Slide the new carriages, with the ground face up, on the
notes of the gantry and under the gantry and screw this
up slightly.
Service Work
Replacing the storage Cart Y-guide carriage / Y-loose bearing Replace
Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2 29
Now press the gantry on the buffer and tighten the screws
on both carriage evenly. The cars must rest on the cutting
face of the gantry.
anliegen!
The screws should be tightened hand-tight and then
marked with red locking varnish.
The carriages are mounted, each with a central M4 screw
to achieve a so called "soft connection". This ensures e.g.
that temperature fluctuations do not affect so much.
Service Work
Y-guide carriage / Y-loose bearing Replace Exchange loose bearing running block LR205-2RSR [03076849-xx]
30 Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2
2.6.3 Exchange loose bearing running block LR205-2RSR [03076849-xx]
NOTICE
The gantry must be continued on the gantry tub.
Remove the cover plate on the gantry bottom.