SM_SXDX12_intern_03-2017_en - 第4页
4 Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2
Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2 3
Table of Contents
1 Introduction 5
1.1 Safety Instructions 5
1.1.1 Conventions for the Use of Safety Instructions 5
1.1.2 Safety Instructions for Working with Strong Magnetic Fields6
1.1.3 Safety Instructions for the Power Supply 6
1.1.4 Safety Instructions for the Compressed Air Supply 7
1.1.5 Safety Instructions for Work on the Cutting Device 7
1.1.6 Safety Instructions for the Gantry 7
1.1.7 Safety Instructions on Hazardous Materials 7
1.1.8 Laser Classification - Laser Class 1 8
1.1.8.1 Classification of the Whole Machine 8
1.1.8.2 Classification of the Camera Systems 8
1.2 Preparatory Work... 9
1.3 Other Instructions 11
1.3.1 Environmentally-Friendly Disposal of Materials and Components 11
1.3.2 Use of Original SIPLACE Accessories and Spare Parts 11
1.3.3 Information About This Service Manual (Internal Version) 11
1.3.4 ESD Guidelines 11
1.3.4.1 Definition of ESD 11
1.3.4.2 Important Measures to Protect Against Static Charging 12
1.3.4.3 Handling ESD Modules 12
1.3.4.4 Measurements and Modifications to ESD Modules 12
1.3.4.5 Dispatching ESD Modules 12
1.3.5 Validity of Document 13
1.3.6 SIPLACE on the World Wide Web (WWW) 13
1.4 Staff Qualifications and Training 13
1.5 Abbreviations 14
2 Service Work 15
2.1 Overview 15
2.2 Prepare Gantry lift 16
2.3 Machine preparation 16
2.4 Safety Instructions for Working with Strong Magnetic Fields 17
2.5 Exchange / Demounting of Y-Magnets 20
2.6 Y-guide carriage / Y-loose bearing Replace 24
2.6.1 Prepare the guide carriage 25
2.6.2 Replacing the storage Cart 26
2.6.3 Exchange loose bearing running block LR205-2RSR [03076849-xx] 30
2.6.4 Final Work 34
2.7 Replacement Y-Guide Rails 35
4 Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2
Introduction
Conventions for the Use of Safety Instructions Safety Instructions
Service Manual (Internal) SIPLACE SX1/SX2/DX1/DX2 5
1Introduction
This service guide is a manual or reference work for performing internal service work on the SIPLACE®
SX1/SX2/DX1/DX2 placement machines.
1.1 Safety Instructions
1.1.1 Conventions for the Use of Safety Instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid dam-
age to equipment. These notes are highlighted by warning triangles and are indicated as follows accord-
ing to the level of risk:
DANGER
Nonobservance of these safety instructions may cause injury to personnel and damage to the
machine!
► Please observe the safety instructions in the user manual of the relevant machine for all
work!
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable dam-
age to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable dam-
age to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property may
occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indicates
a part of the manual that requires particular attention.