KE-2030使用说明书 - 第28页

1 − 19 (4) Area in which backup pins cannot be proved KE-2030E 搬送レール固定側 E 基板仕様 基板搬送方向 バックアップ ピン 設置不可範囲 4mm 1 7.5mm 1 7.5mm 2 1 mm 50mm 20mm 0 ～ 220mm （可動） 37mm （搬送方向左流れ時、 35mm ） 36mm 1 05mm 0 ～ 85mm 20mm 基板裏面デッドスペース 30mm…

100%1 / 723
1 − 18
(2) Area in which backup pins cannot be proved KE-2030M
搬送レール固定側
M基板仕様
基板搬送方向
バックアップピン
設置不可範囲
4mm
17.5mm
17.5mm
21mm
50mm
20mm
0～90mm（可動）22mm
（搬送方向左流れ時、20mm）
36mm
105mm
0～85mm
20mm
基板裏面デッドスペース
30mm範囲
ストッパ設置位置
Xストッパ設置位置
Note: When the PWB is transferred from right to left, the marginal area of 50mm x
20mm is set on the left.
When the PWB is transferred from right to left, the marginal area of 36mm x
105mm is set on the right.
(3) Area in which backup pins cannot be proved KE-2030L
搬送レール固定側
L基板仕様
基板搬送方向
バックアップピン
設置不可範囲
4mm
17.5mm
17.5mm
21mm
50mm
20mm
0～178mm（可動）37mm
（搬送方向左流れ時、35mm）
36mm
105mm
0～85mm
20mm
基板裏面デッドスペース
30mm範囲
ストッパ設置位置
Xストッパ設置位置
Note: When the PWB is transferred from right to left, the marginal area of 50mm x
20mm is set on the left.
When the PWB is transferred from right to left, the marginal area of 36mm x
105mm is set on the right.105mm is set on the right.
Movement of PWB
X stopper position
Stopper position
Dead zone of the rear of a PWB:
within the 30 mm-area
Conveying rail (fixed)
Area in which backup
pins cannot be provided
(Variable)
(20 mm when the
PWB is
transferred from
Movement of PWB
Stopper position
Area in which backup
pins cannot be provided
Movement of PWB
Stopper position
Area in which backup
pins cannot be provided
X stopper position
Conveying rail (fixed)
(Variable)
Dead zone of the rear of a PWB:
within the 30 mm-area
(35 mm when the
PWB is
transferred from
1 − 19
(4) Area in which backup pins cannot be proved KE-2030E
搬送レール固定側
E基板仕様
基板搬送方向
バックアップピン
設置不可範囲
4mm
17.5mm
17.5mm
21mm
50mm
20mm
0～220mm（可動）37mm
（搬送方向左流れ時、35mm）
36mm
105mm
0～85mm
20mm
基板裏面デッドスペース
30mm範囲
ストッパ設置位置
Xストッパ設置位置
Note: When the PWB is transferred from right to left, the marginal area of 50mm x
20mm is set on the left.
When the PWB is transferred from right to left, the marginal area of 36mm x
105mm is set on the right.
Movement of PWB
X stopper position
Stopper position
Dead zone of the rear of a PWB:
within the 30 mm-area
Conveying rail (fixed)
Area in which backup
pins cannot be provided
(Variable)
(35 mm when the
PWB is
transferred from
Movement of PWB
Stopper position
Area in which backup
pins cannot be provided
1 − 20
(5) Allowable height of a component to be placed and allowable height of the rear of
a board
Figure 1.1.7.1
5. Board Recognition Marks
Create the board recognition marks under the following conditions. (See Figure
1.1.7.2.) We recommend the filled circle for the mark. The clearance area
around the mark shall be as shown in Figure 1.1.7.3. Within this area, there
shall not be any silk patterns, strip lines (including inner layer patterns), through
holes, resists, and other components.
A size: 1 to 3 mm ±0.1 mm
B size: 0.2 ±0.03 mm
C size: 0.5 to 3.0 mm ±0.1 mm
A
B
B
B
A
A
A
C
B
C
C
C
C
A
B
A
B
B
B
B
B
B
Figure 1.1.7.2
Component
PWB
Max. 6mm
Marginal area
on the back of
PWB
Stopper or X stopper position
Max.
30m
Max.
40m