KE-2030使用说明书 - 第438页

6 − 92 ■ ■ ■ ■ W hen the system perform s the continuous product ion and starts pr oduction aft er re-clamping a board Infor mation on the PWB tr ansport path obtained w hen produc tion was interrup te d Whether there is…

100%1 / 723
6 − 91
⑨ If production is interrupted during production with the IN station while a board
located on the ejecting side waits for being ejected in “Sequential and Mix” mode
(A continuous production file is used and you select to re-clamp a board.)
Loading side (waiting)
IN station
(during production)
OUT station (waiting) Ejecting side (waiting)
↓
Loading side IN station
OUT station (ejecting a
board)
Ejecting side(ejecting a
board)
↓
Loading side
IN station
(board re-clamping)
OUT station Ejecting side
◇ In this case, you have to feed a board located on the ejecting side to the next
process, a board located on the OUT station to the ejecting side, and a board
located on the IN station to the OUT station to clamp it.
Note that after ejecting boards located on the OUT station and ejecting station,
the system re-clamps a board located on the IN station to perform the continuous
production.
6 − 92
■
■■
■ When the system performs the continuous production and starts production after
re-clamping a board
Information on the
PWB transport path
obtained when
production was
interrupted
Whether there is a board
on the PWB transport
path
Image of the PWB transport condition
Step
No.
Whether to
resume
production
Production
operation
Left Right Left Right Left Right
Operation after you press
the <START> key
①
Yes
Yes
After a board is clamped again, the
system resumes the production
without loading a board before
starting production
②
Yes
None
Error
③
None
Yes
Error
④
None
None
Not selectable
⑤
Yes Yes
No
information
No
information
After re-clamping a board, the
system performs the continuous
production without loading any
board (Be careful).
⑥
Yes
Yes
Error
⑦
Yes
None
After a board is clamped again, the
system resumes the production
without loading a board before
starting production
⑧
None
Yes
Error
⑨
None
None
Not selectable
⑩
Yes None
No
information
No
information
After re-clamping a board, the
system performs the continuous
production without loading any
board (Be careful).
⑪
Yes
Yes
Error
⑫
Yes
None
Error
⑬
None
Yes
After a board is clamped again, the
system resumes the production
without loading a board before
starting production
⑭
None
None
Not selectable
⑮
None Yes
No
information
No
information
After re-clamping a board, the
system performs the continuous
production without loading any
board (Be careful).
⑯
Yes
Yes
⑰
Yes
None
⑱
None
Yes
Error (No board)
⑲
None
None
Not selectable
⑳
Yes
Production
after a
board is
clamped
(when you
select
“Re-clamp
current
PWB”)
None None
No
information
No
information
Error (No board)
6 − 93
■
■■
■
When the system starts production after re-clamp current PWB without performing the
continuous production
Information on the
PWB transport path
obtained when
production was
interrupted
Whether there is a board
on the PWB transport
path
Image of the PWB transport condition
Step
No.
Whether to
resume
production
Production
operation
Left Right Left Right Left Right
Operation after you press
the <START> key
①
Yes
Yes
②
Yes
None
③
None
Yes
Not selectable
However, this type of production is
selectable when the system
resumes the suspended production.
In this case, the system operates in
the same manner as it does when
there is no PWB transport path
information as described below.
④
None
None
⑤
Yes Yes
No
information
No
information
After re-clamping a board, the
system performs the continuous
production without loading any
board (Be careful).
⑥
Yes
Yes
⑦
Yes
None
⑧
None
Yes
Not selectable
However, this type of production is
selectable when the system
resumes the suspended production.
In this case, the system operates in
the same manner as it does when
there is no PWB transport path
information as described below.
⑨
None
None
⑩
Yes None
No
information
No
information
After re-clamping a board, the
system performs the continuous
production without loading any
board (Be careful).
⑪
Yes
Yes
⑫
Yes
None
⑬
None
Yes
Not selectable
However, this type of production is
selectable when the system
resumes the suspended production.
In this case, the system operates in
the same manner as it does when
there is no PWB transport path
information as described below.
⑭
None
None
⑮
None Yes
No
information
No
information
After re-clamping a board, the
system performs the continuous
production without loading any
board (Be careful).
⑯
Yes
Yes
⑰
Yes
None
⑱
None
Yes
Not selectable
However, this type of production is
selectable when the system
resumes the suspended production.
In this case, the system operates in
the same manner as it does when
there is no PWB transport path
information as described below.
⑲
None
None
⑳
No
Production
after a
board is
clamped
(when you
select
“Re-clamp
current
PWB”)
None None
No
information
No
information
Error (No board)