KE-2030使用说明书 - 第465页
6 − 1 19 ⑧ Pick t racking Using the r adio button, set whether or not t o perf orm pick up track ing bef ore blank run by the camer a, and also the t ypes of track ing. ⑨ Track ing St ation Select on which station t he p…
6 − 118
blank run by the camera, and also the types of tracking.
6 − 119
⑧ Pick tracking
Using the radio button, set whether or not to perform pickup tracking before
blank run by the camera, and also the types of tracking.
⑨ Tracking Station
Select on which station the placement tracking or pick up tracking is to be
performed.
⑩ Automatic interval
Enter the interval of automatic run.
⑪ PWB wait time
Set the time-out duration which starts production if the IN sensor does not
detect the board transported by the IN station after it is clamped with the OUT
station.
⑫ Prod. station (Production station)
Specify a station that is to be used for producing PWBs. When you select
“Let” or “Right” station, the system uses a station only at one side to produce
PWBs. Even though you need a station at only one side to produce PWBs,
create Pick data for both stations in a production program.
6.6.1 Starting the blank run
To start the blank run, press the <START> switch on the operation panel after setting
the desired blank-run conditions.
CAUTION
The head starts to move immediately after the <START> switch is
pressed, and then "Blank run" starts.
To avoid a risk of injury, do not place your hand in the machine, nor
move your face or head close to the machine during operation of the
machine.
Before pressing the <START> switch, check that there is no one who is
working in the machine.
Before pressing the <START> switch, check that there is no one who
can be injured when the head starts to move.
Before pressing the <START> switch, check that there are no obstacles
(tools and jigs) attached or left in the machine.
The green signal lamp lights to indicate that the blank run operation is in progress.
CAUTION
If the feeder bank is never recognized (since the machine is zeroed, or
the bank moves down then up), it may be recognized automatically
before the machine moves to the pick position. Since the head moves
across the feeder while the feeder bank is being recognized, do not
place your hand in the machine, nor move your face or head close to
the machine. Especially, take care when the feeder bank is
recognized not from the menu but during teaching or tracking a pick
position.
6 − 120
6.6.2 Display of the production status
When the <START> switch is pressed and the production starts, the status of the
production (the same as that of the board production) appears on the screen.
For details, see the section "Display of the production status" of the "PWB
production".
Any production management information is not created.
For the item of "Result", the number increases with the increasing number of
produced boards but it is not loaded into the production management information.
The Pause, Stop, and Exit commands used during blank run operation are the same
as those during the board production.
6.6.3 Monitoring by camera
Same as the "Monitoring by camera" of "Trial run".