KE-2030使用说明书 - 第497页
7 − 3 Current set tings of the m enu items " Com ponent scrap posit ion", " Head wait position ", and "ST d Device enable " Figure 7.1.1. 3 Machine setup initial screen 3 Current set tings o…
7 − 2
7.1.1 Immediately after start-up
The machine setup initial screen, as shown in Figures 7.1.1.1 through Figure 7.1.1.8,
appears when [Set up], then [Machine Setup] is selected from the menu bar.
The machine setup initial screen shows the values defined currently for the
parameters to be set. To scroll the screen, move the scroll bar up and down using
the cursor keys or page up and down keys.
Current settings of the menu item "ATC nozzle setup"
Figure 7.1.1.1 Machine setup initial screen 1
Current settings of the menu item "Vacuum value without nozzle" and "Reference pin
position"
Figure 7.1.1.2 Machine setup initial screen 2
7 − 3
Current settings of the menu items " Component scrap position", " Head wait position
", and "STd Device enable "
Figure 7.1.1.3 Machine setup initial screen 3
Current settings of the menu item "Option Device enable", "Function Device enable "
and "VCS Device enable"
Figure 7.1.1.4 Machine setup initial screen 4
7 − 4
Current settings of the menu item "MTC/MTS Device enable", "HLC connection" and
"PWB conveor"
Figure 7.1.1.5 Machine setup initial screen 5
Current settings of the menu items "Vacuum table" and "Signal light"
Figure 7.1.1.6 Machine setup initial screen 6
To change the setting of each item select [Setting Group] of the menu bar.
When you select an item on the Set up group menu, and set the appropriate
parameter, the Machine setup initial screen reappears.