Host Computer System.pdf - 第141页
AVK3 HOST COMPUTER SYSTEM 5.5 Del eting NC Data in Ex ecution Program D77HEC-50- 440-A0 5.5- 4
AVK3
HOST COMPUTER SYSTEM
5.5 Deleting NC Data in Execution Program
D77HEC-50-440-A0
5.5-3
<NC data in AVK3>
NC data before deletion NC data after deletion
N001 d1d1……
N002 (1) data
N003 d2d2……
N004 d3d3……
N005 (2) data
N006 (3) data
N007 d4d4……
N008 d5d5……
N009 d6d6……
N001 d1d1……
N002 d2d2……
N003 d3d3……
N004 d4d4……
N005 d5d5……
N006 d6d6……
Condition
Can be used in optional specification.
Valid in ONLINE mode only.
If execution program is not selected, ‘A4E00’ is returned.
Can be deleted continuously until ‘A2’ is received.
If received during operation, ‘A4E00’ is returned.
AVK3
HOST COMPUTER SYSTEM
5.5 Deleting NC Data in Execution Program
D77HEC-50-440-A0
5.5-4
AVK3
HOST COMPUTER SYSTEM
5.6 Inquiring and Altering Parts Data in Execution Program
D77HEC-50-450-A0
5.6-1
5.6. Inquiring and Altering Parts Data in Execution
Program
D77HEC-50-450-A0
5.6.1 Inquiring and Altering Parts Data in Execution Program
If the host computer gives C4 command to AVK3, the parts data in execution programs filled in AVK3 can be
inquired and/or altered.
Inquiring and alteration of parts data of the execution program will end when A2 command is sent from the
host computer.
Data details
Parts data by one block lot can be inserted by giving D1 command from the host computer after the A0
command (data request) has been sent from the AVK3.
AVK3 is returned in D1 command. If the updated data is returned from the AVK3, the data of the next block
lot can be inserted.
Host computer ⇒ AVK3
No. Data name
Max.
digits
Input range Omit
Vari-
able
Remarks
1 Z axis No. 3 001 to 121
×
Z121 is a jumper.
2 Parts data
Alteration is possible also if
sending only the data desired to
be altered.
Data omitted will not be altered.
If all are omitted, it becomes an
inquiry.
AVK3 ⇒ Host computer
No. Data name
Max.
digits
Input range
Sup-
press
Fix Remarks
1 Z axis No. 3 001 to 121
×
Sends the designated parts
data.
2 Parts data
×
Sends the format same as in
the upload of parts data.
If altered, the updated data is
output. If inquired the current
data is output.
=REMARKS=
The data condition is the same as in the upload of parts data.
STX
D 1 Z x
No. of
characters
1
x x
ETXCheck sum
Parts data
2
STX
C 4 P A
No. of
characters
ETX
Check sum