Host Computer System.pdf - 第30页

AVK3 HOST COMPUTER SYSTEM 2.3 Downloadi ng P.C. B. Da t a D77HEC-52- 030-A1 2.3- 1 2.3. Downloading P.C.B. Data D77HEC - 52-030-A 1 2.3. 1 Downloading P.C. B . Data  Data details  1) – 1 C0C ∗ - ∗ 1 No. Data name Max. …

100%1 / 174
AVK3
HOST COMPUTER SYSTEM
2.2 Downloading Parts Data
D77HEC-52-100-A0
2.2-2
=REMARKS=
Possible of sending the optional feeder only.
If exceeding the max. digit number, the data of the max. digits from the head becomes valid.
If ‘∗’ character is found in one message, it becomes EOP.
If a character cannot be judged, the following numeric values will also be ignored.
Protocol
Condition
Can be used in standard specification.
Valid in ONLINE mode only.
The data becomes valid when EOP (∗) is received and the processing normally ends down to A2.
(If the processing ends abnormally in downloading, the data will be cleared.)
If the same program as the one in the memory is specified and the processing ends abnormally, the
program in the memory is deleted.
If the download is executed with exceeding the remaining steps or exceeding the stored program
numbers, sends ‘A4E00’ to end the processing.
If the program currently being executed is downloaded during operation, ‘A4E00’ is returned.
If D0 is sent after receiving EOP, ‘A4E01’ is returned.
Start of download
Host computer
Requests next data.
AVK3
D 0 Parts data
A 0
C0U
Control No.:
3 digits
Program name (Up
to 12 characters)
D 0
Parts data
A 0
A 0
D 0 Feeder No.
∗
A 2
End of transmission
End of reception
A 0
Creates a directory.
AVK3
HOST COMPUTER SYSTEM
2.3 Downloading P.C.B. Data
D77HEC-52-030-A1
2.3-1
2.3. Downloading P.C.B. Data
D77HEC-52-030-A1
2.3.1 Downloading P.C.B. Data
Data details
1) – 1
C0C∗ - ∗
1
No. Data name
Max.
digits
Input range
Sup-
press
Vari-
able
Remarks
1 Program name 15
‘0’ to ‘9’
‘A’ to ‘Z’
Special
character
×
If other than the valid
character, A4E01 is returned.
1) – 2
D0XnnnnnnYnnnnnnHnnnnnn
1 2 3
No. Data name
Max.
digits
Input range
Sup-
press
Vari-
able
Remarks
1
PCB dimension
X
6 0 to 999999
Only + direction
µm
2
PCB dimension
Y
6 0 to 999999
Only + direction
µm
3
Reference hole
pitch
6 0 to 999999
Only + direction
µm
=REMARKS=
If the data is omitted, the last data remains.
If exceeding the max. digit number, the data of the max. digits from the end becomes valid.
If a character cannot be identified, the following numeric values will also be ignored.
AVK3
HOST COMPUTER SYSTEM
2.3 Downloading P.C.B. Data
D77HEC-52-030-A1
2.3-2
Protocol
Condition
Automatic width control can be used validly.
Valid in ONLINE mode only.
The data becomes valid when EOP (∗) is received and the processing normally ends down to A2.
(If the processing ends abnormally in downloading, the data will be cleared.)
If the same program as the one in the memory is specified and the processing ends abnormally, the
program in the memory is deleted.
If the program currently being executed is downloaded during operation, ‘A4E00’ is returned.
Start of download
Host computer
Requests next data.
AVK3
D 0 PCB data
A 0
C0C
Control No.:
3 digits
Program name (Up
to 12 characters)
D 0
∗
Transfers NC data.
A 0
Transfers NC data.
Requests next data.
End of transmission
End of reception
A 0
Creates a directory.
Stores the received NC
data in RAM.