STM1-S_SDV_Maintenance(Eng_Ver1).pdf - 第20页
Chap ter 1 This Chapter describes the work environment and working tools for the maintenance of the machine. Conditions fo r Main t e nanc e Multi -Func tional Placer ST M1-S M ain ten an ce Ha nd bo ok 1-1 1 T ools for …
Chapter 1
This Chapter describes the work environment and working tools for the maintenance of
the machine.
Conditions for Maintenance
Multi-Functional Placer
STM1-S Maintenance Handbook
1-10
Tools for Maintenance
Conditions for Maintenance
3. How to use the lubricator
Step 1.
Components of the lubricator: Lubricator-1, Connection
Tube-2, Nipple Tip-2
Step 2.
Use short nipple tip for X L/M guide lubrication.
Step 3.
Use long nipple tip for the lubrication of parts in
common use.
Step 4.
Pull the cylinder lever backward until it hangs from the
groove and then fill the lubricator with grease.
Step 5.
Assemble the lubricator nozzle and body.
Chapter 1
This Chapter describes the work environment and working tools for the maintenance of
the machine.
Conditions for Maintenance
Multi-Functional Placer
STM1-S Maintenance Handbook
1-11
Tools for Maintenance
Step 6.
Move the rear lever forward and remove the air inside
the lubricator using the handle.
Step 7.
After visual check, inject appropriate amount of grease
pressing the handle.
Step 8.
After lubrication, remove the waste grease that has
leaked out.
Caution
Inject the specified grease using the specified lubricator according to
the proper method.
Do not lubricate in any manner other than that shown above.
If the machine's operating environment is harsh, check its lubrication
status frequently.
Chapter 1
This Chapter describes the work environment and working tools for the maintenance of
the machine.
Conditions for Maintenance
Multi-Functional Placer
STM1-S Maintenance Handbook
1-12
Tools for Maintenance
Conditions for Maintenance
4. Grease List
Part No. Part Name Use Specifications Ref.
HP09-000258 GREASE-GUN_MG70_THK
- X Frame LM Guide, Ball Screw
- Y Frame Ball Screw
- Y Frame LM Guide
THK / MG70 70g Exclusive use GUN
CM02-000083 GREASE-GREASE_AFE-CA+70_THK;SYNTHETIC,OL
- X Frame LM Guide, Ball Screw
- Y Frame Ball Screw
- Y Frame LM Guide
AFE-CA+70 Volume: 70g
CM02-000084 GREASE-GREASE_AFE-CA+400_THK;OIL,SYNTHET AFE-CA+400 Volume: 400g
CM02-900022 GREASE GADUS S2 V220-2 - Head LM Guide GADUS S2 V220-2 Volume: 15kg
CM02-900008 GREASE AFF-70 - Head Ball Spline AFF-70 Volume: 70g