STM1-S_SDV_Maintenance(Eng_Ver1).pdf - 第58页
Mon thly Inspe ction Chap ter 5 Multi -Func tional Placer ST M1-S M ain ten an ce Ha nd bo ok 5 -7 Cleaning and apply grease the Head LM Guide, Ball Spline T ool for M aintenanc e Ultra-fine fiber cloth, Flat Br ush, GRE…
Monthly Inspection
Chapter 5
Multi-Functional Placer
STM1-S Maintenance Handbook
5-6
Checking and replacing the cover cooling fan filter
Monthly Inspection
Checking and replacing the cover cooling fan filter
Tool for Maintenance
Vacuum cleaner,
Measures
Cooling Fan Filter
Cooling Fan Filter Cover
Step 1.
Remove the filter in the order as shown in the following
figure and clean it. (If the filter is damaged, replace it.)
ㆍ Separate the cooling fan cover
ㆍ Separate the filter
ㆍ Clean the filter using a vacuum
cleaner
Caution
Washing the cooling fan filter with water may cause damage to the
filter by making it harden.
Step 2.
Release the emergency stop as described in "Releasing
'Emergency Stop' mode" on page 1-6 and perform the
operation again.
(Time required: 15min / No. M-4)
Monthly Inspection
Chapter 5
Multi-Functional Placer
STM1-S Maintenance Handbook
5-7
Cleaning and apply grease the Head LM Guide, Ball Spline
Tool for Maintenance
Ultra-fine fiber cloth, Flat Brush, GREASE: AFE-CA
Measures
Step 1.
Move the X Frame to front by referring to "Forward
movement of the X-frame" on page 1-3.
Step 2.
Press the 'STOP' and 'RESET' buttons in order after
pressing the 'EMG' button on the OP panel to stop
operation.
For more details, refer to "How to perform emergency stop" on page
1-2.
Step 3.
Clean the LM guide rail and mirror CAM and ball spline
using an ultra fine fiber cloth.
Step 4.
Apply grease to the LM guide rail and mirror CAM and
ball spline using a flat brush.
Grease application capacity for each spindle: 5 to 10g
Step 5.
Release the emergency stop as described in "Releasing
'Emergency Stop' mode" on page 1-6 and perform the
operation again.
Cleaning and apply grease the Head LM Guide, Ball
Spline
(Time required: 30min / No. M-5)
Monthly Inspection
Chapter 5
Multi-Functional Placer
STM1-S Maintenance Handbook
5-8
Cleaning and Lubricating X Frame LM Guide, Ball Screw
Monthly Inspection
Tool for Maintenance
Ultra-fine fiber cloth, Lubricator (Grease-Gun_Mg70_THK), Grease : AFE(THK)
Measures
Step 1.
Move the X Frame to front by referring to "Forward
movement of the X-frame" on page 1-3.
Step 2.
Press the 'STOP' and 'RESET' buttons in order after
pressing the 'EMG' button on the OP panel to stop
operation.
For more details, refer to "How to perform emergency stop" on page
1-2.
Cleaning and Lubricating X Frame LM Guide, Ball
Screw
Step 3.
Clean the LM guide rail and ball screw using an ultra fine
fiber cloth
(Time required: 60min / No. M-6)