STM1-S_SDV_Maintenance(Eng_Ver1).pdf - 第72页
Multi -Func tional Placer MEMO ST M1-S M ain ten an ce Ha nd bo ok 5 -2 1 Monthly Inspe ction
Monthly Inspection
Chapter 5
Multi-Functional Placer
STM1-S Maintenance Handbook
5-20
Inspect and cleaning the Y Cable Duct Cooling Fan
Step 6.
Turn on the power supply to the machine
For more details, refer to "Power supply procedure" on page 1-5
Step 7.
Check the operation status and noise of the Y cable duct
cooling fan.
Caution
The cooling fan replaement work accomanies a danger.
Therefore, contact out C/S company (STS) or local agent.
Multi-Functional Placer
MEMO
STM1-S Maintenance Handbook
5-21
Monthly Inspection
Yearly Inspection and Appendix
Chapter 6
Multi-Functional Placer
STM1-S Maintenance Handbook
6-1
Cleaning The Ionizer Nozzle
Chapter 6
Yearly Inspection and Appendix
Cleaning The Ionizer Nozzle
Tool for Maintenance
Ionizer Nozzle Corresponding fixture
Measures
Step 1.
Press the 'STOP' and 'RESET' buttons in order after
pressing the 'EMG' button on the OP panel to stop
operation.
For more details, refer to "How to perform emergency stop" on page
1-2.
Step 2.
Turn off the power supply to the machine
For more details, refer to "How to turn off the power supply" on
page 1-1.
(Time required: 15min / No. Y-1)
Caution
If the power supply is not cut off, an electric shock may occur due
to the high voltage of the ionizer.