STM1-S_SDV_Maintenance(Eng_Ver1).pdf - 第8页
STM1-S Maintenance Handbook T able of Contents Chap ter 1 Conditions for Maintenance Common Working Procedur e before Maintenance .. 1-1 Common Working Procedur e before Maintenance . 1-5 Working Environment and Conditio…
※ Warnings and cautions for safety
■ Cautions to be exercised for the safety and to be referred to for the work are
described as follows in this manual.
Danger
If the instructions following this symbol are not followed, serious accidents
could occur, or death or serious injury of the operator could happen. Be
sure to follow the instructions.
Warning
If the instructions following this symbol are not followed, serious accidents
could occur, or serious injury of the operator could happen. Be sure to
follow the instructions.
Caution
If the instructions following this symbol are not followed, damage of
machine hardware, software, and data could occur or the operator could
be injured. Be sure to follow the instructions.
The item according to this mark describes the item to which the user needs
to refer when performing the corresponding work.
※ Cautions to be exercised before using the machine
Warning
Cut off the pneumatic system and power supply before performing
maintenance and repair of the machine. Otherwise, personal injury or
death may occur. Hanwha Techwin is not responsible for problems caused
by machine repairs performed in a manner not mentioned in this manual,
or any modifications carried out without prior approval.
Caution
If you need an additional repair other than the maintenance work
mentioned in this manual, contact our C/S company (STS) or local agent
for proper measures.
※ Symbols for Work Instructions
■ This manual expresses safety related items to be kept in mind as well as
reference items for work as indicated by the following symbols:
Inspect
The remarks following this symbol refer to performing visual inspection of
foreign material, chip etc.
Clean
The remarks following this symbol refer to cleaning with cloth or brush.
Grease
The remarks following this symbol refer to injecting grease using a grease
gun.
Replace
The remarks following this symbol refer to replacing a part.
Apply
Grease
This symbol refers to applying grease using a brush.
STM1-S Maintenance Handbook
Table of Contents
Chapter 1
Conditions for Maintenance
Common Working Procedure before Maintenance ..1-1
Common Working Procedure before Maintenance . 1-5
Working Environment and Condition ...................... 1-7
Tools for Maintenance .............................................. 1-8
Chapter 2
Inspection Items for Maintenance
Daily Inspections ........................................................ 2-1
Weekly Inspections....................................................2-3
Monthly Inspections (1/2) .........................................2-5
Monthly Inspections (2/2) .........................................2-7
Chapter 3
Daily Inspection
Checking and cleaning the nozzle ........................... 3-1
Cleaning feeder and feeder base .............................3-4
Checking and replacing the air filter ........................3-7
Checking and replacing Mist Separator Filter ...........3-9
Inspection the conveyor steel belt ...........................3-11
Inspection and clean 폐테이프 무인 이송기 ............ 3-12
Inspection and replace the 박리기 노즐패드 .......... 3-13
Multi-Functional Placer
STM1-S Maintenance Handbook
Chapter 4
Weekly Inspection
Checking the Solenod Valve ..................................... 4-1
Checking and Replacing Head Vacuum Filter ..........4-3
Cleaning the conveyor chamber ...............................4-5
Replace the 박리기 진공이젝터 .................................4-7
STM1-S Maintenance Handbook
Chapter 6
Yearly Inspection and Appendix
Cleaning The Ionizer Nozzle ..................................... 6-1
Replacing the Fuse ....................................................6-3
Consumable Parts List ............................................... 6-5
Chapter 5
Monthly Inspection
Cleaning the Head Spindle ....................................... 5-1
Inspection and cleaning conveyor sensor .................5-3
Checking and cleaning cover cooling fan ................5-5
Checking and replacing the cover cooling fan filter 5-6
Cleaning and apply grease the Head LM Guide, Ball Spline
5-7
Cleaning and Lubricating X Frame LM Guide, Ball Screw
5-8
Cleaning and Lubricating Y Frame LM Guide ..........5-9
Cleaning and Lubricating the Y Frame Ball screw ...5-11
Cleaning the Ionizer Nozzle .................................... 5-13
Cleaning the Cover ................................................. 5-15
Inspect and cleaning the Y Cable Duct Cooling Fan 5-16