00198124-02_JC_PM_WF4_TX_EN - 第39页
9 WF 4 TX-Series Maintenance Grease the guide bearing, clean the linear guide and scale of the X-Axis 5 min 3 / 3 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c …
9 WF 4 TX-Series Maintenance Grease the guide bearing, clean the linear guide and scale of the X-Axis 5 min 2 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T89
Wear Part: Consumables:
C3, C5, C49
www.asm-smt.com
7 If NOT go to step 9. 8 If YES contact service. 9 Move the X-Axis 30 cm.
10 Repeat steps 5 to 9 twice. 11 Remove the excess grease around the
grease nipple.
12 Repeat steps 4 to 11 for other grease
nipples at the gantry.
9 WF 4 TX-Series Maintenance Grease the guide bearing, clean the linear guide and scale of the X-Axis 5 min 3 / 3
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T89
Wear Part: Consumables:
C3, C5, C49
www.asm-smt.com
13 Clean the linear guide. 14 Clean the X scale guide. 15 Repeat steps 4 to 14 for X-Axis of the
other gantry.
www.asm-smt.com