00198124-02_JC_PM_WF4_TX_EN - 第46页
12 WF 4 TX-Series Maintenance Check and clean the gas pressure shock absorber 4 min 2 / 2 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M a i …
12 WF 4 TX-Series Maintenance Check and clean the gas pressure shock absorber 4 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C3
www.asm-smt.com
1 Clean the cover sliding surface. 2 Open and close the cover several times. 3 Check if any oil visible.
4 If no oil go to step 6. 5 If NOT OK contact service for exchange. 6 Repeat steps 1 to 5 for the second ab-
sorber.
12 WF 4 TX-Series Maintenance Check and clean the gas pressure shock absorber 4 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C3
www.asm-smt.com
7 Open the cover 15 cm. 8 The cover should not close. 9 If OK go to step 11.
10 If NOT OK contact service. 11 Repeat steps 1 to 10 for the other cover.
13 WF 4 TX-Series Maintenance Clean and lubricate the nozzle changer: TH 3 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C4, C31
www.asm-smt.com
1 Move the gantry over the transport. 2 Remove all nozzles. 3 Clean the nozzle garage.
4 Ensure to properly clean the spring lock. 5 Return all nozzles.