00198124-02_JC_PM_WF4_TX_EN - 第52页
www.asm-smt.com
15 WF 4 TX-Series Maintenance Clean feeder modules and cut the tapes 3 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T1, T18
Wear Part: Consumables:
www.asm-smt.com
1 Vacuum all loose components from feeder
modules.
2 Cut the remaining tape directly at the
feeder.
3 After cutting: Ensure to leave 2 holes over-
lapping.
4 Repeat steps 1-3 for other feeder tables.
www.asm-smt.com
16 WF 4 TX-Series Maintenance Lubricate the X-feeder table 3 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C3, C4, C31, C33
www.asm-smt.com
1 Undock/ release all feeders. 2 Move all feeders 10 cm back. 3 Spray grease on a cloth.
4 Wipe the centering strip. 5 Lock the feeders in the trolley. 6 Grease the roller on both sides of the
feeder table.