00198124-02_JC_PM_WF4_TX_EN - 第59页
19 WF 4 TX-Series Maintenance Calibrating the TH 14 min 1 / 9 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M a i n t e n a n c e Machine Stat…
www.asm-smt.com
19 WF 4 TX-Series Maintenance Calibrating the TH 14 min 1 / 9
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T5
Wear Part: Consumables:
www.asm-smt.com
1 Press the stop button. 2 Open the cover. 3 Place the calibration tool in pocket.
4 Close the cover. 5 Do not click machine start button. 6 Click on "settings and options" icon.
19 WF 4 TX-Series Maintenance Calibrating the TH 14 min 2 / 9
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T5
Wear Part: Consumables:
www.asm-smt.com
7 Click on "user settings" icon. 8 Click on "machine service" icon. 9 If you mount the same heads continue
with step 22.
10 Click on "check sensor and options" icon. 11 Click on "check sensors function of spe-
cific components" icon.
12 Click on "TH" icon.