00193922-01 - 第149页

User Manual SIPLAC E HF Series 4 Setting up and commissioning Software Version SR.505.xx 05/2004 US Edition 4.3 Delivery configuration and transport 149 be impor tant when fine- tunin g the mach ine. The ele ctrical plug…

100%1 / 358
4 Setting up and commissioning User Manual SIPLACE HF Series
4.3 Delivery configuration and transport Software Version SR.505.xx 05/2004 US Edition
148
4.3 Delivery configuration and transport
4.3.1 Transport packaging
The placement machine is supplied in a wooden crate mounted on a stable wooden pallet.
4.3.1.1 Dimensions of the transport packaging
The dimension of the wooden transport crate are as follows:
Length 2404 mm
Width 2790 mm
Height 1600 mm 4
4
Fig. 4.3 - 1 Transport crate - dimension in millimeters
(A) Fork-lift attachment points
4.3.1.2 Weight of the placement machine prepared for dispatch
The weight of the placement machine prepared for dispatch, including packaging, is 4287 kg for
the HF machine and 4337 kg for the HF/3 machine.
4.3.2 Configuration when delivered
The placement machine is configured as follows when delivered:
– The extension kit on the PCB input side (point 1 in Fig. 4.2 - 3
) is removed from the basic ma-
chine.
– All electrical cables to the basic machine are disconnected.
– Each track on the single or dual conveyor is set to a width of 136 mm. This width setting will
User Manual SIPLACE HF Series 4 Setting up and commissioning
Software Version SR.505.xx 05/2004 US Edition 4.3 Delivery configuration and transport
149
be important when fine-tuning the machine.
The electrical plug-in connections on the conveyor motor and the conveyor light barrier for the
left-hand track are then easily accessible on the dual conveyor.
– The input conveyors of the single and dual conveyor are dismantled. The electrical cables to
the conveyor motors and light barriers are disconnected.
– Both keyboards (point 4 in Fig. 4.2 - 3
) are folded down vertically.
– The main fault indicator is dismantled (point 6 in Fig. 4.2 - 3
).
– All the gantry axes are fixed with shipping braces.
4.3.3 Transporting the placement machine in the crate
4.3.3.1 Services
As a service, SIEMENS L&A can fully integrate the SIPLACE HF placement machine into your
production line. With our extensive expertise and by using the right tools and equipment, we can
ensure that the installation process runs smoothly and efficiently. However, this will require you to
clarify the infrastructure aspects in advance and make any necessary changes at your production
facility.
Please note that the safest way to transport the placement machine is always in the transport crate
- or at the very least on the pallet. This will prevent serious damage to the machine caused by the
feet colliding with obstacles, for example.
4.3.3.2 Safety instructions
WARNING
– The applicable accident prevention regulations concerning the transportation of heavy goods
must be followed.
– There is a risk that the machine will tip over if you do not use the fork-lift specified in section
4.3.3.3
to transport the placement machine.
– In particular, you should wear safety boots to minimize the risk of crushing your feet.
4.3.3.3 Means of transport
Use a fork-lift truck with the following specification to carry the machine in its crate:
Fork length: min. 1800 mm
Carrying power: min. 6000 kg
Clear width between forks: min. 350 mm 4
4 Setting up and commissioning User Manual SIPLACE HF Series
4.3 Delivery configuration and transport Software Version SR.505.xx 05/2004 US Edition
150
4.3.3.4 Fork-lift attachment points on the transport crate
Attach the fork-lift only at the points identified by (A) in Fig. 4.3 - 1. We recommend that you keep
the crate and packaging for later use.
WARNING
If you still decide to transport the placement machine without a crate or pallet, you MUST follow
the instructions in the next section to avoid serious damage to your machine.
4.3.4 Transporting the placement machine without a crate or pallet
4.3.4.1 Safety instructions
WARNING
Æ The applicable accident prevention regulations concerning the transportation of heavy goods
must be followed.
Æ In particular, you should wear safety boots to minimize the risk of crushing your feet.
Æ Read this section in full before transporting the machine to avoid severe damage.
Æ When you are transporting the machine, make sure that all the feet are clear of the floor. If they
are not clear, the feet will drag along the floor and bump into obstacles. This could damage the
machine foot thread in the machine frame.
4.3.4.2 Means of transport
Use a fork-lift truck with the following specification to carry the machine:
Fork length: min. 1800 mm 4
Carrying power: min. 6000 kg 4
Distance between forks with the forks running parallel to the
direction of PCB transport: 420 mm 4
Distance between forks with the forks running across the
direction of PCB transport: 800 mm - 900 mm 4