00193922-01 - 第16页

1 Introduction User Manual SIPLACE HF Series 1.1 Description Software Version S R.505.xx 05/2004 US Edition 16 1.1 Description The placem ent sy stems from the SI PLACE HF s eries a re particularl y suitable for applica …

User Manual SIPLACE HF Series 1 Introduction

Software Version SR.505.xx 05/2004 US Edition

1 Introduction

These operating instructions provide a manual or reference work for 1

– operating and

– setting up

the placement machines for the HF series. 1

Fig. 1.0 - 1 SIPLACE HF/3 placement system

The header of each chapter contains the 1

– release and

– software version

to which this manual applies. 1

1 Introduction User Manual SIPLACE HF Series

1.1 Description Software Version SR.505.xx 05/2004 US Edition

1.1 Description

The placement systems from the SIPLACE HF series are particularly suitable for applications

that demand a high level of flexibility, utmost precision and high placement rate. Two placement

methods are used: 1

– the Collect & Place method for high-speed placement of standard components

– the Pick & Place method for fast placement of special fine-pitch and super-fine pitch compo-

nents

1.1.1 HF placement machine

The HF machine has two gantries driven by linear motors. The gantries can be quickly and ac-

curately positioned in the X and Y directions. The gantry arms are lightweight constructions

made from a highly rigid carbon fiber composite material. There is a placement head on each

gantry. The following placement head configurations are possible: 1

Placement areas 1 and 2

– 12-segment Collect&Place head or

– 6-segment Collect&Place head or

– TwinHead

1.1.2 HF/3 placement machine

The HF/3 machine also has a third gantry in placement area 1. The following placement head

configurations are possible: 1

Placement area 1

– two 12-segment Collect&Place heads or

– two 6-segment Collect&Place heads or

– one 6-segment and one 12-segment Collect & Place head

Placement area 2

– 12-segment Collect&Place head or

– 6-segment Collect&Place head or

– TwinHead

User Manual SIPLACE HF Series 1 Introduction

Software Version SR.505.xx 05/2004 US Edition 1.1 Description

The head modularity principle allows the placement heads to be reconfigured to suit changing

requirements. 1

The SIPLACE principle 1

The moving head picks up the components from their stationary feeder, and places them on the

PCB, which is also stationary. This proven SIPLACE principle has many advantages: 1

– Short down times for refilling or splicing

– Even the smallest components (e.g. 0201) are picked up reliably

– The components cannot slip on the PCB

– Minimal traversing paths

High flexibility, cost-effectiveness and set-up reliability combine to ensure that the SIPLACE HF

series placement machines provide high productivity. Minimum down times increase utilization

and thus help to increase productivity. 1