00193922-01 - 第164页
4 Setting up and commissioning User Manual SIPLACE HF Series 4.5 Setting up the placement machine Software Version SR.505.x x 05/2004 US Edition 164 4.5.4 Preset ting the PC B transport hei ght Æ Pu sh the for ks of the …
User Manual SIPLACE HF Series 4 Setting up and commissioning
Software Version SR.505.xx 05/2004 US Edition 4.5 Setting up the placement machine
163
4.5.3 Tools and equipment
You will need the following tools and equipment to adjust the height of your placement machine:
– Open-ended spanner 17 / 19, item no. 00096278-01
Size 17 for detaching the air connection on the docking unit cylinder 4
– Open-ended spanner 30 / 36, item no. 00096286-01
Size 36 for the hexagon head screw M24x80 for adjusting the height of the machine feet4
– Single-ended spanner, size 65, item no. 00353827-01
Size 65 for the hexagon lock nut M24 on the "HS50" machine foot" 4
– Allen key, size 10, item no. 00373926-01
for hexagon socket head screws M12x80 for fixing the spacers 4
– Allen key, size 14, item no. 00373927-01
for hexagon socket head screw M16x90 for fixing the block for adjusting the height of the
machine feet 4
– Allen key, size 19, item no. 00373928-01
for hexagon socket head screw M24x90 for clamping the machine feet clamps 4
–Fork-lift
Fork length: min. 1800 mm 4
Lifting power: min. 6000 kg 4
Clear width between forks: see Fig. 4.5 - 1
4
– Machine spirit level: Accuracy 0.02 mm/m
– Air cushion transport system: SIPLACE HSxx, order no. 00119002-01
4 Setting up and commissioning User Manual SIPLACE HF Series
4.5 Setting up the placement machine Software Version SR.505.xx 05/2004 US Edition
164
4.5.4 Presetting the PCB transport height
Æ Push the forks of the fork-lift under the placement machine, as shown in Fig. 4.5 - 1.
4
Fig. 4.5 - 1 Contact surfaces - Forks parallel to the direction of PCB transport
(1) Contact surfaces for the forks of the fork-lift
WARNING
Please note the following points
before
you raise the placement machine in order to avoid irre-
versible damage to the machine:
– Open the forks just wide enough to position them between the two machine feet (the attach-
ment points are shown in Fig. 4.3 - 2
). The machine feet are 776 mm apart. NEVER increase
the distance between the forks so that the machine is lifted on the side parts of the machine
User Manual SIPLACE HF Series 4 Setting up and commissioning
Software Version SR.505.xx 05/2004 US Edition 4.5 Setting up the placement machine
165
frame, since this would deform the machine frame.
Æ Make sure that the forks are evenly loaded when you lift the machine. A firm support between
the forks and placement machine will prevent the machine tilting when it is raised. This will also
prevent a one-sided load on the machine feet, which would deform the fixing of the machine
feet. We recommend that a second person watch the machine as it is raised, and make sure
that the machine does not tip to one side when lifted with the fork-lift.
Æ With the fork-lift, raise the machine approximately 35 cm. This will avoid any risk of injuring your
feet if you lower the machine feet accidentally.
The placement machine stands on 6 feet.
– 4 machine feet (item 1 in Fig. 4.5 - 2
)
– 2 "HS50" machine feet (item 2 in Fig. 4.5 - 2
) with 2 spacers (items 3 and 4 in Fig. 4.5 - 2)
for adjusting the height, if necessary.