00193922-01 - 第17页

User Manual SIPLAC E HF Series 1 Introduction Software Version SR.505.xx 05/2004 US Edition 1.1 Description 17 The head modularity principl e allows the placeme nt heads to be reco nfigured to suit chan ging requireme nt…

1 Introduction User Manual SIPLACE HF Series

1.1 Description Software Version SR.505.xx 05/2004 US Edition

1.1 Description

The placement systems from the SIPLACE HF series are particularly suitable for applications

that demand a high level of flexibility, utmost precision and high placement rate. Two placement

methods are used: 1

– the Collect & Place method for high-speed placement of standard components

– the Pick & Place method for fast placement of special fine-pitch and super-fine pitch compo-

nents

1.1.1 HF placement machine

The HF machine has two gantries driven by linear motors. The gantries can be quickly and ac-

curately positioned in the X and Y directions. The gantry arms are lightweight constructions

made from a highly rigid carbon fiber composite material. There is a placement head on each

gantry. The following placement head configurations are possible: 1

Placement areas 1 and 2

– 12-segment Collect&Place head or

– 6-segment Collect&Place head or

– TwinHead

1.1.2 HF/3 placement machine

The HF/3 machine also has a third gantry in placement area 1. The following placement head

configurations are possible: 1

Placement area 1

– two 12-segment Collect&Place heads or

– two 6-segment Collect&Place heads or

– one 6-segment and one 12-segment Collect & Place head

Placement area 2

– 12-segment Collect&Place head or

– 6-segment Collect&Place head or

– TwinHead

User Manual SIPLACE HF Series 1 Introduction

Software Version SR.505.xx 05/2004 US Edition 1.1 Description

The head modularity principle allows the placement heads to be reconfigured to suit changing

requirements. 1

The SIPLACE principle 1

The moving head picks up the components from their stationary feeder, and places them on the

PCB, which is also stationary. This proven SIPLACE principle has many advantages: 1

– Short down times for refilling or splicing

– Even the smallest components (e.g. 0201) are picked up reliably

– The components cannot slip on the PCB

– Minimal traversing paths

High flexibility, cost-effectiveness and set-up reliability combine to ensure that the SIPLACE HF

series placement machines provide high productivity. Minimum down times increase utilization

and thus help to increase productivity. 1

1 Introduction User Manual SIPLACE HF Series

1.2 General Software Version SR.505.xx 05/2004 US Edition

1.2 General

1.2.1 How to get information

If you have any further questions concerning this manual or if you would like additional informa-

tion on a particular topic, please get in touch with your local SIEMENS dealer or contact us di-

rectly at: 1

Siemens L&A

Rupert-Mayer-Str. 44

D-81379 Munich 1

1.2.2 SIPLACE on the World Wide Web (WWW)

We also have our own site on the Internet. Why not log onto our SIPLACE home page at http://

www.siplace.com? 1

Fig. 1.2 - 1 The SIPLACE home page