00193922-01 - 第225页

User Manual SIPLAC E HF Series 5 Tasks on the m achine Software Vers ion SR.505.xx 05/2004 US Edition 5.9 Docking the component trolley in or out 225 5.9 Docking th e comp onent troll ey in or ou t 5.9.1 Safety instructi…

5 Tasks on the machine User Manual SIPLACE HF Series

5.8 Refilling components Software Version SR.505.xx 05/2004 US Edition

224

5.8 Refilling components

The online help contains information on refilling components with and without barcodes.

Æ With tape feeders, make sure that you always splice on a new tape early enough so that the

feeders do not run out of components.

Æ However, do not splice the tapes too early because if you wind the tape onto the new reel after

splicing the end of the old tape, the reel with the new tape may be overfilled. The tape could

then slip off the reel and become tangled. Under certain circumstances, this could cause pick-

up errors and prolonged down times.

Æ Always insert spindles when using tape reels of 5" and larger (see Fig. 5.3 - 3) and make sure

that the dividing plates are inserted correctly (see Fig. 5.3 - 2

User Manual SIPLACE HF Series 5 Tasks on the machine

Software Version SR.505.xx 05/2004 US Edition 5.9 Docking the component trolley in or out

225

5.9 Docking the component trolley in or out

5.9.1 Safety instructions for docking component trolleys in and out

WARNING

To prevent accidents (risk of crushing), the component trolley may only be docked in or out by

one person.

The safety concept for the component trolley change requires the operator to press two buttons

at the same time in order to dock in the component trolley. One button is beneath the protective

cover, while the other is on the hand guard side (items 1 and 2 in Fig. 5.9 - 1

). This ensures that

the operator is always standing to the side of the placement machine. The operation always re-

quires the use of both hands, thus preventing the risk of injury to the hands.

Fig. 5.9 - 1 Safety instructions for docking the component trolley in or out

(1) Button on top of the hand guard beneath the protective cover

(2) Button, on the side of the hand guard

5 Tasks on the machine User Manual SIPLACE HF Series

5.9 Docking the component trolley in or out Software Version SR.505.xx 05/2004 US Edition

226

5.9.2 Docking out the component trolley

Æ Click on the STOP PROCESSING PCB icon in the MAIN VIEW menu.

The PCB in progress will be completed. The icons of the SINGLE FUNCTIONS menu will

then be activated. 5

Æ Click on the desired SINGLE FUNCTIONS GANTRY X icon (gantry 1 or 2).

Æ Select GANTRY FUNCTIONS.

Æ From this menu, click on the GO TO SET-UP POSITION button.

The selected placement head will move across the PCB transport to prevent it being dam-

aged when the component trolley is changed. 5

Æ Take hold of the protective cover by the handle and open the cover.

Fig. 5.9 - 2 Docking out the component trolley

(1) Button underneath the protective cover

(2) Button on the hand guard