00193922-01 - 第302页
7 Station extensions User Manual SIPLACE HF Series 7.3 Component barc ode reader Software Version S R.505.xx 05/2004 US Edition 302 7.3 Com ponent b arcode re ader 7.3.1 Gener al With the p lacement system, a barcod e re…
User Manual SIPLACE HF Series 7 Station extensions
Software Version SR.505.xx 05/2004 US Edition 7.2 Component camera for the TwinHead, FC camera
301
7.2.1.3 Position of the component vision cameras for the TwinHead on the HF/3 placement
machine
7
Fig. 7.2 - 3 Position of the component vision cameras for the TwinHead on the HF/3 placement machine
(1) Assembly position for the CO vision camera (stationary, P&P (type 22) 50 x 40), location 3
(2) Assembly position for the CO vision camera (stationary, P&P (type 20) 8 x 8), location 3
7.2.2 Safety instructions for the TwinHead component cameras
during a placement head change
WARNING 7
When the placement head is changed from the TwinHead to the Collect&Place head, the Twin-
Head's component vision cameras (stationary, P&P, type 22, 50 x 40, and type 20, 8 x 8) must be
removed, otherwise the Collect&Place head will collide with the camera housings.
7 Station extensions User Manual SIPLACE HF Series
7.3 Component barcode reader Software Version SR.505.xx 05/2004 US Edition
302
7.3 Component barcode reader
7.3.1 General
With the placement system, a barcode reader can be used to check that the track allocation is
correct and to read component data from component reels. A barcode reader can be installed on
both of the operator panels on the placement system. A retrofit kit contains two component bar-
code readers.
7
Fig. 7.3 - 1 Component barcode reader
(1) Barcode reader
Track allocation 7
Four-digit barcode strips are attached to the lateral safety screens for the purposes of track allo-
cation. The first digit is used to identify the component table (1, 2, 3, or 4), while the remaining
three digits specify the track number. There are also return barcodes at both ends of the barcode
User Manual SIPLACE HF Series 7 Station extensions
Software Version SR.505.xx 05/2004 US Edition 7.3 Component barcode reader
303
strip. The barcode strips are numbered consecutively in intervals of two (1, 3, 5, 7...) and each
represents 2 tracks (barcode 1 = track 1 and 2).
Components 7
Data can be read from the component reels to compare the stock of components against the quan-
tity specified in the set-up file (refill check), for example.
An audible signal is given when each dataset has been read successfully.
PLEASE NOTE 7
The component barcode reader option must be configured on the SIPLACE Pro computer.
Barcodes that start with the number 1, 2, 3, or 4 and are 4 digits long are interpreted as track bar-
codes. All other barcodes that do not start with number 1, 2, 3, or 4 are regarded as component
barcodes.
7.3.2 Technical data
7
Component barcode reader
Max. resolution 0.13 mm
Scanning speed 36 scans/sec.
Laser class Laser class 1
Degree of protection IP 64
Dimensions 225 x 69 x 67 mm³
Weight 380 g
Cable length 2 m
Influence of ambient light Immune to the direct incidence of normal light and the
indirect incidence of sunlight
Operating temperature - 10°C to + 40°C
Atmospheric humidity Max. 90% (non-condensing)
Compatible barcode types Code 39 (normal / FULL ASCII)
EAN/UPC (family with/without ADD ON
CODABAR
INTERLEAVED 2/5
NORMAL 2/5 (5 bars)
(others available upon request)