00193922-01 - 第54页
2 Operational safety User Manual SIPLACE HF Series 2.5 Safety instru ctions for operating the mac hine Software Version SR.505.xx 05/ 2004 US Edition 54 tape channel without manu al ass istance. This ensur es that the op…
User Manual SIPLACE HF Series 2 Operational safety
Software Version SR.505.xx 05/2004 US Edition 2.5 Safety instructions for operating the machine
53
2.5.6 Safety instructions for docking the component trolley in or out
WARNING
To prevent accidents (danger of crushing), only one person may stand in the vicinity of the com-
ponent trolley during docking in and out.
2
Fig. 2.5 - 5 Safety instructions for docking the component trolley in or out
2
(1)Button on top of the hand guard beneath the protective cover
(2)Button, on the side of the hand guard
2
The safety concept for the component trolley change requires the operator to press two buttons
at the same time in order to dock in the component trolley. One button is beneath the protective
cover, while the other is on the side of the hand guard (items 1 and 2 in Fig. 2.5 - 5
). This ensures
that the operator is always standing to the side of the placement machine during docking-in. The
operation always requires the use of both hands, thus preventing the risk of injury to the hands.
Æ Shorten the component tapes on the front end of the feeder to approximately 3 cm before you
dock in the component trolley. The ends of the tape will then slide into the opening in the used
2 Operational safety User Manual SIPLACE HF Series
2.5 Safety instructions for operating the machine Software Version SR.505.xx 05/2004 US Edition
54
tape channel without manual assistance. This ensures that the operator no longer has to reach
into the danger area of the used tape channel.
2.5.7 Safety instructions for moving the component trolley
WARNING
To prevent accidents, ALWAYS follow the rules listed below when you move the component trol-
ley.
Æ Always hold the handles with both hands when you want to move the component trolley.
Æ Remember that a component trolley with the full complement of feeders can tip over sideways
or forward on gradients of 20° or more.
Æ Make sure that the surface on which the trolley is moved has a significantly smaller gradient.
Æ Be careful not to collide with obstacles. The trolley could tip forward if it is traveling fast enough.
User Manual SIPLACE HF Series 2 Operational safety
Software Version SR.505.xx 05/2004 US Edition 2.6 Safety equipment
55
2.6 Safety equipment
2.6.1 Protective covers
2
Fig. 2.6 - 1 Protective covers
2
The traveling range of the gantries has four protective covers that can be swung upwards. There
are side screens to prevent access to the inside of the machine from the side. Access to the PCB
(1)Protective cover, short
(2)Protective cover, long
(3)Cover and hand guard on the input belt
(4)Cover and hand guard on the output conveyor