00197551-01_MM_CPP-CP-Twin_Kunde_en - 第42页
Maintenance Tasks for C&P20/A/M/P Head Preparatory Steps 42 Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin Multipette ► Prepare the multipette. For more information abo ut this, read s ection "9…
Maintenance Tasks for C&P20/A/M/P Head
Preparatory Steps
Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin 41
4.4
4.4 Preparatory Steps
Preparatory Steps
Preparing the Head Mount
Preparing the Head Mount
► Assemble the head mount. For details, refer to the assembly instructions "Universal placement head
mounting rack" [DE+EN: 00196371-xx].
Vacuum test
► Set the nozzles for the current nozzle configuration down in the nozzle changer.
► Before you begin maintenance work, perform a vacuum test. Use the calibration nozzles for this
(C&P20/A/M: 1235, C&P20 P: 4235).
If vacuum value irregularities occur at certain segments, take a closer look at these during mainte-
nance work. Note down the numbers of the problematic segments for later reference.
Preparing the Placement Head
► Dismantle the placement head and remove it from the placement machine. For details, refer to the
service manual for your machine.
Use the FHE function if possible.
► Fit the placement head onto the head mount.
Multipette
CAUTION
ESD
► Connect the assembly mount ESD connection to an ESD connection at the workplace.
► Always observe the ESD regulations described in the user manual.
Protective hose for component sensor (example of
C&P20 A shown)
► Fit the protective hose (1) onto the component sen-
sor.
NOTICE!
A cover is used on the C&P20 P, instead of the protective
hose.
Maintenance Tasks for C&P20/A/M/P Head
Preparatory Steps
42 Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin
Multipette
► Prepare the multipette. For more information about this, read section "9 Handling the Multipette"
[ ➙ 89]. Also observe the following instructions:
Color-coding of dosage devices and lubricants
CAUTION
Do not combine lubricants!
Contamination (combination) of lubricants can affect the service life of the bearings!
► Only use the combitip specifically marked for each lubricant, to avoid combining the lubri-
cants.
Color Tools and lubricants Application
White White combitip
Nye Synthetic Oil 200A 30 ml
Driver bearing
(C&P20 only)
Black Black combitip
Klüberalfa DH 3-100
Driver bearing
(C&P20A/M/P only, not C&P20)
Blue Blue combitip
Lubcon Thermoplex ALN 1001/00 50 ml
Segment guide rail/Z axis guide
(all C&P20 variants)
Maintenance Tasks for C&P20/A/M/P Head
Overview of Lubrication Points
Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin 43
4.5
4.5 Overview of Lubrication Points
Overview of Lubrication Points
Z linear guide
2 x 4 µl Lubcon Thermoplex ALN 1001/00 (blue combitip)
per ball groove
DP segment guide
2 x 2 µl Lubcon Thermoplex ALN 1001/00 (blue combitip)
per ball groove at each segment
Driver bearing
C&P20:
1 x 1 µl Nye Synthetic Oil 200A (white combitip) per driver
bearing
C&P20A/M/P:
1x 1 µl Klüberalfa DH 3-100 (black combitip) per driver
bearing.