00197551-01_MM_CPP-CP-Twin_Kunde_en - 第43页

Maintenance Tasks for C&P20/A/M/P Head Overview of Lubrication Points Maintenance Manual SIPLACE Placement Heads CPP, C &P20, Twin 43 4.5 4 . 5 O v e r v ie w o f L u b r ic a t io n P o in t s Overview of Lubric…

100%1 / 92
Maintenance Tasks for C&P20/A/M/P Head
Preparatory Steps
42 Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin
Multipette
► Prepare the multipette. For more information about this, read section "9 Handling the Multipette"
[ ➙ 89]. Also observe the following instructions:
Color-coding of dosage devices and lubricants
CAUTION
Do not combine lubricants!
Contamination (combination) of lubricants can affect the service life of the bearings!
► Only use the combitip specifically marked for each lubricant, to avoid combining the lubri-
cants.
Color Tools and lubricants Application
White White combitip
Nye Synthetic Oil 200A 30 ml
Driver bearing
(C&P20 only)
Black Black combitip
Klüberalfa DH 3-100
Driver bearing
(C&P20A/M/P only, not C&P20)
Blue Blue combitip
Lubcon Thermoplex ALN 1001/00 50 ml
Segment guide rail/Z axis guide
(all C&P20 variants)
Maintenance Tasks for C&P20/A/M/P Head
Overview of Lubrication Points
Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin 43
4.5
4.5 Overview of Lubrication Points
Overview of Lubrication Points
Z linear guide
2 x 4 µl Lubcon Thermoplex ALN 1001/00 (blue combitip)
per ball groove
DP segment guide
2 x 2 µl Lubcon Thermoplex ALN 1001/00 (blue combitip)
per ball groove at each segment
Driver bearing
C&P20:
1 x 1 µl Nye Synthetic Oil 200A (white combitip) per driver
bearing
C&P20A/M/P:
1x 1 µl Klüberalfa DH 3-100 (black combitip) per driver
bearing.
Maintenance Tasks for C&P20/A/M/P Head
Performing Maintenance Tasks 4.6.1 Replacing the Pressure Control Valve
44 Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin
4.6
4.6 Performing Maintenance Tasks
Performing Maintenance Tasks
4.6.1
4.6.1 Replacing the Pressure Control Valve
Replacing the Pressure Control Valve
Not on CP20 P
Replacin g the Pres sure Contr ol Valve
Replacing the Pressure Control Valve
➢ The placement head must be removed for this maintenance task.
► Replace the pressure control valve. Read the service manual for your placement head for more in-
formation.
NOTICE
Not on C&P20 P
This maintenance task must be performed on all Twin, CPP, C&P20, C&P20 A and C&P20 M
heads.
This maintenance task is not required for the C&P20 P.
NOTICE
Recommendation
We recommend that you have an additional pressure control valve available, so that this can
be easily replaced during head maintenance.
The actual cleaning of the removed pressure control valve can be performed later on.
► For more information about this, read section "6 Maintenance Tasks for Pressure Control
Valve" [ ➙ 65].