00197551-01_MM_CPP-CP-Twin_Kunde_en - 第5页

Table of contents Maintenance Manual SIPLACE Placement Heads CPP, C &P20, Twin 5 9 Handling the Multipette 89 9.1 Overview of Multipette 89 9.2 Assembling the Multipette 89 9.3 Filling and Setti ng the Multipette 90 …

100%1 / 92
Table of contents
4 Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin
4.1 Differences Between C&P20, C&P20 A, C&P20 M and C&P20 P 36
4.2 Maintenance Intervals 38
4.3 Tools, Consumables, Spare and Wear Parts 39
4.4 Preparatory Steps 41
4.5 Overview of Lubrication Points 43
4.6 Performing Maintenance Tasks 44
4.6.1 Replacing the Pressure Control Valve 44
4.6.2 Cleaning the Z Axis 45
4.6.3 Oiling the DP Segment Guide 47
4.6.4 Oiling the Z Axis Linear Guidance 49
4.6.5 Oiling the DP Driver Bearing 50
4.6.6 Vacuum Operation: Maintenance Tasks on Vacuum-Conducting Parts 51
4.6.7 Compressed Air Operation: Maintenance Tasks on Vacuum-Conducting Parts 53
4.6.8 Cleaning the Raceway and the Jaw 55
4.6.9 Fitting the Cover/Silencer 56
4.6.10 Replacing the Filter Disks 56
4.6.11 Checking/Replacing the Switching Disk 58
4.6.12 Cleaning the Component Sensor 59
4.7 Final Work 60
5 Maintenance Tasks for Twin 61
5.1 Maintenance Intervals 61
5.2 Tools, Consumables, Spare and Wear Parts 62
5.3 Preparatory Steps 63
5.4 Performing Maintenance Tasks 63
5.4.1 Replacing the Pressure Control Valve 63
5.4.2 Cleaning the Sleeve and Nozzle Seat 64
5.4.3 Cleaning/Replacing the Additional Volume Filter 64
6 Maintenance Tasks for Pressure Control Valve 65
6.1 Tools, Consumables, Spare and Wear Parts 65
6.2 Overview 66
6.3 Performing Maintenance Tasks 66
6.3.1 Checking/Cleaning the Pressure Control Valve 66
7 Maintenance Tasks for Holding Circuit 75
7.1 Tools, Consumables, Spare and Wear Parts 75
7.2 Preparatory Steps 76
7.3 Performing Maintenance Tasks 76
7.3.1 CPP: Cleaning/Checking the Holding Circuit 76
7.3.2 C&P20/A/M/P: Cleaning/Checking the Holding Circuit 78
8 Maintenance Tasks for Nozzles 81
8.1 Maintenance Intervals 81
8.2 Tools, Consumables, Spare and Wear Parts 81
8.3 Nozzle Magazines - Overview 82
8.4 Preparatory Steps 83
8.5 Performing Maintenance Tasks 84
8.5.1 Cleaning/Replacing the Ceramic Nozzles 84
8.5.2 Replacing the Plastic Nozzles 88
Table of contents
Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin 5
9 Handling the Multipette 89
9.1 Overview of Multipette 89
9.2 Assembling the Multipette 89
9.3 Filling and Setting the Multipette 90
9.4 Releasing the Combitip from the Multipette 90
Table of contents
6 Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin