00197551-01_MM_CPP-CP-Twin_Kunde_en - 第61页
Maintenance Tasks for Twin Maintenance Intervals Maintenance Manual SIPLACE Placement Heads CPP, C &P20, Twin 61 5 5 M a in t e n a n c e T a s k s f o r T w in Maintenance Tasks for Twin 5.1 5 . 1 M a in t e n a n c…
Maintenance Tasks for C&P20/A/M/P Head
Final Work 4.6.12 Cleaning the Component Sensor
60 Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin
4.7
4.7 Final Work
Final Work
Attaching the maintenance label
Fitting the placement head
► Fit the placement head back onto the gantry. Read the service manual for your machine first.
► Remove the protective cover from the component sensor.
► Switch the placement machine on at the main switch.
► Calibrate the placement head, preferably using the FHE function. For details, refer to the service
manual.
► For SW704 and higher only: Reset the maintenance cycle counter for the corresponding assemblies.
► Remove any label which may still be present from the
placement head.
► Remove any adhesive residues and clean the area.
► Attach the label and enter the date and, if required,
the meter count, depending on how you determine
your maintenance intervals.
Maintenance Tasks for Twin
Maintenance Intervals
Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin 61
5
5 Maintenance Tasks for Twin
Maintenance Tasks for Twin
5.1
5.1 Maintenance Intervals
Maintenance Intervals
5305 - Major - TH/VHF
NOTICE
Description example
The following tasks are performed using the example of a Twin. The procedure for the other
Twin variants Twin HF, VHF P&P and Twin VHF is the same. Any relevant differences will be
mentioned explicitly.
Maintenance tasks
Twin
Duration
[min]
Each
week
Every 3
months
Every 6
months
Every 12
months
Preparing the Placement Head 5 X
Replacing the Pressure Control Valve 3 X
Cleaning the Sleeve and Nozzle Seat 2 X
Cleaning/Replacing the Additional Volume Filter 2 X
Maintenance Tasks for Twin
Tools, Consumables, Spare and Wear Parts
62 Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin
5.2
5.2 Tools, Consumables, Spare and Wear Parts
Tools, Consumables, Spare and Wear Parts
The following lists contain all necessary consumable materials, wear and spare parts plus tools for per-
forming maintenance tasks.
HMK = Included in Head Maintenance Kit
* Optional part in HMK
Consumables Item no. HMK
OIL Interflon Fin Super (Teflon oil) (for nozzle pickup) 03017760-xx
Lint-free cloth, KM wipe 03082092- xx
SIPLACE cleaning tissue, if required 00315253- xx
Compressed air
ISOFLEX Topas 5051 50 ml 03078517- xx
Ethanol
Isopropanol – IPA can be used as an alternative.
Cleaning sticks 00388764- xx X
Wear parts Item no. HMK
Replacement filter FE 50 03047489- xx
Tools Item no. HMK
ESD wriststrap TYP.OK/WRS 00320279- xx
Universal placement head mounting rack 03056231- xx
Needle Nosed Pliers
Slotted screwdriver size 0
Press-fit blade for Phillips screwdriver size 1
TorqueVario-S screwdriver (1.0-5.0 Nm) 03078400- xx X
Bit holder for TorqueVario screwdriver 03078706- xx X*
Additionally required documentation Item no. HMK
If required, service manual for removal and installation of placement head
in your machine.
You need more tools etc.
If required, assembly instructions "Universal placement head mounting
rack"
00196371- xx