00197551-01_MM_CPP-CP-Twin_Kunde_en - 第66页
Maintenance Tasks for Pressur e Control Valve Overview 6.3.1 Checking/Cleaning the Pressu re Control Valve 66 Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin 6.2 6 . 2 O v e r v ie w Overview 6.3 6 . 3 P …
Maintenance Tasks for Pressure Control Valve
Tools, Consumables, Spare and Wear Parts
Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin 65
6
6 Maintenance Tasks for Pressure Control Valve
Maintenance Tasks for Pressure Control Valve
6.1
6.1 Tools, Consumables, Spare and Wear Parts
Tools, Consumables, Spare and Wear Parts
The following lists contain all necessary consumable materials, wear and spare parts plus tools for per-
forming maintenance tasks to the pressure control valve.
HMK = Included in Head Maintenance Kit
See also
8.2 Tools, Consumables, Spare and Wear Parts [ ➙ 81]
Consumables Item no. HMK
Lint-free cloth, KM wipe 03082092- xx
Ethanol
Isopropanol – IPA can be used as an alternative.
Cleaning sticks 00388764- xx X
Distilled water
Compressed air
ISOFLEX Topas 5051 50 ml 03078517- xx
Tools Item no. HMK
ESD wriststrap TYP.OK/WRS 00320279- xx
Allan key set 0.7 – 2 mm 00320265- xx X
Torque interchangeable blades 3mm hexagonal 03109522- xx X
Torque screwdriver ESD 0.1-0.6 Nm 00386132- xx X
Torque interchangeable blades 1.5 mm, hexagonal 00386135- xx X
Torque interchangeable blades 2 mm, hexagonal 00386136- xx X
Torx blade TX6 150 03076647- xx X
Press-fit blade for Phillips screwdriver size 1
Slotted screwdriver size 0
Philips inset PH1 03075861- xx
Wrench socket size 8
Tweezers 150 mm pointed, angled 00096487- xx
Maintenance Tasks for Pressure Control Valve
Overview 6.3.1 Checking/Cleaning the Pressure Control Valve
66 Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin
6.2
6.2 Overview
Overview
6.3
6.3 Performing Maintenance Tasks
Performing Maintenance Tasks
6.3.1
6.3.1 Checking/Cleaning the Pressure Control Valve
Checking/Cleaning the Pressure Control Valve
Dismantling the Pressure Control Valve
Overview of pressure control valves
NOTICE!
Not on C&P20 P
This maintenance task must be performed on all Twin,
CPP, C&P20, C&P20 A and C&P20 M heads.
This maintenance task is not required for the C&P20 P.
The following tasks are described using the example of a
pressure control valve for a C&P20. The procedure is the
same for other types.
NOTICE
Tweezers
When replacing hoses, use the "tweezers, blunt 145 mm size 3 mm" [00376493-xx], if required.
CAUTION!
The housing, the board and the plunger are coordinated
with one another. Make sure that these are not confused
with parts from other pressure control valves.
Maintenance Tasks for Pressure Control Valve
6.3.1 Checking/Cleaning the Pressure Control Valve Performing Maintenance Tasks
Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin 67
Dismantling the cover (example of C&P20 shown)
➢ You need to remove the pressure control valve for
this maintenance task.
► Loosen the three screws (1) fastening the cover.
► Lift off the cover (2).
To do this, first tilt the cover on the long side
upwards (3). Now pull the cover down and off on the
short side (4).
CAUTION
Do not damage the Flexprint sheet.
The Flexprint sheet between the two boards is highly sensitive.
► Always take hold of the short board.
► Do not make any rotational movements by pressing the long board sideways.
Dismantling the long board
► Loosen the two screws (1) fastening the long
board (2).
CAUTION!
Take care not to damage the Flexprint sheet between the
two boards.