00197551-01_MM_CPP-CP-Twin_Kunde_en - 第74页

Maintenance Tasks for Pressur e Control Valve Performing Maintenance Tasks 6.3.1 Checking /Cleaning the Pressur e Control Valve 74 Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin ► Fit the cover plate int…

100%1 / 92
Maintenance Tasks for Pressure Control Valve
6.3.1 Checking/Cleaning the Pressure Control Valve Performing Maintenance Tasks
Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin 73
Assembling the Pressure Control Valve
O-ring on the coil
► Lightly grease the O-ring (1) on the coil with Isoflex
Topas 5051.
► Wipe off any excess grease.
Fitting the short board
► Plug the board and coil (2) into the valve body (1).
CAUTION!
Make sure that the coil is pushed straight into the valve
body.
Do not distort the coil.
Only apply slight pressure.
Fastening the short board
► Fix the short board (2) into place, using the three fas-
tening screws (1).
Tighten the fastening screws with a torque of 0.2 Nm.
CAUTION!
The fastening screws for the boards are self-tapping
screws.
Make sure that no new thread is created when screwing
in the screws.
Turn the screws first to the left, in order to use the start of
the existing thread.
Maintenance Tasks for Pressure Control Valve
Performing Maintenance Tasks 6.3.1 Checking/Cleaning the Pressure Control Valve
74 Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin
► Fit the cover plate into place with the three fastening screws. Tighten the fastening screws with a
torque of 0.2 Nm.
Fitting the board board
► Position the two white plastic spacers onto the body
of the valve.
► Make sure that the sensor (3) slides smoothly into the
opening (2) in the housing.
Fastening the long board
► Fix the long board (2) into place with the two fasten-
ing screws (1). Tighten the fastening screws with a
torque of 0.2 Nm.
CAUTION!
The fastening screws for the boards are self-tapping
screws.
Make sure that no new thread is created when screwing
in the screws.
Turn the screws first to the left, in order to use the start of
the existing thread.
Maintenance Tasks for Holding Circuit
Tools, Consumables, Spare and Wear Parts
Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin 75
7
7 Maintenance Tasks for Holding Circuit
Maintenance Tasks for Holding Circuit
7.1
7.1 Tools, Consumables, Spare and Wear Parts
Tools, Consumables, Spare and Wear Parts
The following lists contain all necessary consumable materials, wear and spare parts plus tools for clean-
ing the holding circuit.
Consumables Item no. HMK
Lint-free cloth, KM wipe 03082092- xx
Ethanol
Isopropanol – IPA can be used as an alternative.
Distilled water
Compressed air
Protective latex gloves 00372972- xx
Anti-static plastic cleaner and care product (http://www.burnus.de)
Isopropanol – IPA can be used as an alternative.
Ultrasound cleaning agent Alsar 25NKF 03110147- xx
Wear parts Item no. HMK
CPP only:
Set of seals for holding circuit (for CPP and CP20x) 03095007- xx
Tools Item no. HMK
ESD wriststrap TYP.OK/WRS 00320279- xx
Multipipette (replaces: [03078989-xx]) 00386154- xx X
Combitips 10 µl orange 03109540- xx X
Ultrasound device
SIPLACE recommends that you use the following ultrasound device
and accessory parts from BANDELIN electronic (http://www.bande-
lin.com):
▪ Ultrasound device SONOREX SUPER RK 510 [order no. Ban-
delin: 327]
▪ Clip-on basket K 10 [order no. Bandelin: 359]
▪ Handle adjustment GV 10 for baskets (one pair) [order no. Ban-
delin: 092]
▪ Lid D 510 [order no. Bandelin: 3008]
Spare parts Item no. HMK
CPP only:
Holding circuit assembly for CPP version <= 04 03055424- xx
Holding circuit assembly for CPP version >= 05 03081381- xx
C&P20/A/M/P only:
Holding circuit assembly C&P20 03005123- xx