ServiceInstruction_Vision XP - 第11页
Vision XP+ V AC Page 7 2 Maintenance 2.1 General Notes Operating Instructions V ersion 1.5 2 Maintenance All of the tasks requ ired for keeping the s ystem in safe operating condition are describe d in this chapter . 2.1…
Page 6 Vision XP+ VAC
1 Introduction
1.4 Protective Clothing
Operating Instructions
Version 1.5
1.4 Protective Clothing
Fig. 1-1 Protective clothing
Personnel must wear the protective clothing above when carrying out clean-
ing and maintenance work on the system.
Note!
The personal protective equipment must have a CE label confirming that
the manufacturer has fulfilled the requirements of EC directives and EN
standards in the production of the personal protective equipment.
Vision XP+ VAC Page 7
2 Maintenance
2.1 General Notes
Operating Instructions
Version 1.5
2 Maintenance
All of the tasks required for keeping the system in safe operating condition
are described in this chapter.
2.1 General Notes
Only original replacement parts and authorized accessories from
Rehm Thermal Systems GmbH may be used. The use of other parts impairs
system safety, and may void the manufacturer’s liability for damages result-
ing therefrom.
2.2 Recommendations for the use of chemical cleaning agents
Please use only alcohol-free, non-flammable or flame-retardant agents for
cleaning the soldering oven.
The following tools, consumable materials and auxiliary materials are re-
quired for the performance of maintenance work.
Tools:
• Standard tools such as hex keys and wrenches
• Ratchet with socket set
• Puller with M8 thread
• Plastic hammer
• Prying tool
• Putty knife
• Vacuum cleaner
• Brush
Note!
If maintenance / repair work is done by personnel without an appro-
priate training by Rehm, Rehm declines all claims under warranty.
Note!
Before closing the oven, it is essential to check that no cleaning agent con-
tainers (bottles, tins etc.) have been left in the oven chamber!
Page 8 Vision XP+ VAC
2 Maintenance
2.2 Recommendations for the use of chemical clean-
ing agents
Operating Instructions
Version 1.5
• Funnel
• Watering can
Cleaner:
• CF1 oven cleaner (water based cleaner for normal contamination)
• G 50 oven cleaner (water based cleaner for heavy contamination)
• Appropriate cleaning agent
• Rags
Lubricant
• Chain oil Addinol
• Lubricant